Aha152x scsi driver's problem.

Smeet Eday (smeet@neural.co.jp)
Mon, 11 Mar 1996 15:32:44 +0900

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Benson L Chow: "Re: SCSI Kernel Problem - BAD"
Previous message: tpeters: "That silly Linux debate"

Hi,everybody.
I have a problem of aha152x scsi driver.

Environment
Kernel version: 1.3.72
Scsi card: aha1520
Pentium with PCI BUS.

Whenever I boot Linux the kernel reports the
following message:

...
Mar 11 05:58:20 Peako syslogd: exiting on signal 15
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=1; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=2; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=2; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=3; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=3; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=4; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=4; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=5; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=5; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=6; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: aha152x: abort(), SCpnt=0x00296018, QUEUE STATUS:
Mar 11 06:02:47 Peako kernel: issue_SC:
Mar 11 06:02:47 Peako kernel: 0x00296018: target=6; lun=0; cmnd=(Test Unit Ready 00 00 00 00 00
Mar 11 06:02:47 Peako kernel: ); residual=256; buffers=0; phase |not issued|; next=0x00000000
Mar 11 06:02:47 Peako kernel: current_SC:
Mar 11 06:02:47 Peako kernel: none
Mar 11 06:02:47 Peako kernel: disconnected_SC:
Mar 11 06:02:47 Peako kernel:
Mar 11 06:02:47 Peako kernel: waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1 ); SIGNAL (); SELID (27), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Mar 11 06:02:47 Peako kernel: enabled interrupts (ENBUSFREE )
Mar 11 06:02:47 Peako kernel: scsi : detected total.
Mar 11 06:02:47 Peako kernel: lance.c: PCI bios is present, checking for devices...
Mar 11 06:02:47 Peako kernel: Found PCnet/PCI at 0xff40, irq 10.
Mar 11 06:02:47 Peako kernel: eth0: PCnet32 at 0xff40, 00 40 f6 b8 88 27 assigned IRQ 10, no DMA needed.
Mar 11 06:02:47 Peako kernel: lance.c:v1.08 4/10/95 dplatt@3do.com
Mar 11 06:02:47 Peako kernel: Equalizer: $Revision: 3.12 $ $Date: 1995/01/19 $ Simon Janes (simon@ncm.com)
Mar 11 06:02:47 Peako kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Mar 11 06:02:47 Peako kernel: CSLIP: code copyright 1989 Regents of the University of California.

Any help would be Greatly appreciated.
Regards.

-- smeet

Next message: Benson L Chow: "Re: SCSI Kernel Problem - BAD"
Previous message: tpeters: "That silly Linux debate"