Re: [PATCH RFT 3/7] phy: qcom: qmp-combo: introduce QPHY_MODE

[Vinod Koul]

On 29-02-24, 14:07, Neil Armstrong wrote:
> Introduce an enum for the QMP Combo PHY modes, use it in the
> QMP commmon phy init function and default to COMBO mode.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 41 +++++++++++++++++++++++++++----
>  1 file changed, 36 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 3721bbea9eae..ac5d528fd7a1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -61,6 +61,12 @@
>  
>  #define PHY_INIT_COMPLETE_TIMEOUT		10000
>  
> +enum qphy_mode {
> +	QPHY_MODE_COMBO = 0,
> +	QPHY_MODE_DP_ONLY,
> +	QPHY_MODE_USB_ONLY,
> +};
> +
>  /* set of registers with offsets different per-PHY */
>  enum qphy_reg_layout {
>  	/* PCS registers */
> @@ -1491,6 +1497,7 @@ struct qmp_combo {
>  
>  	struct mutex phy_mutex;
>  	int init_count;
> +	enum qphy_mode init_mode;
>  
>  	struct phy *usb_phy;
>  	enum phy_mode mode;
> @@ -2531,12 +2538,33 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
>  	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
>  		val |= SW_PORTSELECT_VAL;
>  	writel(val, com + QPHY_V3_DP_COM_TYPEC_CTRL);
> -	writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
>  
> -	/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> -	qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> -			SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> -			SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +	switch (qmp->init_mode) {
> +		case QPHY_MODE_COMBO:

Case should be at same indent as switch :-) coding style 101

> +			writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> +			/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> +			qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> +					SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> +					SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +			break;
> +
> +		case QPHY_MODE_DP_ONLY:
> +			writel(DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> +			/* bring QMP DP PHY PCS block out of reset */
> +			qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> +					SW_DPPHY_RESET_MUX | SW_DPPHY_RESET);
> +			break;
> +
> +		case QPHY_MODE_USB_ONLY:
> +			writel(USB3_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> +			/* bring QMP USB PHY PCS block out of reset */
> +			qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> +					SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +			break;
> +	}
>  
>  	qphy_clrbits(com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
>  	qphy_clrbits(com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> @@ -3545,6 +3573,9 @@ static int qmp_combo_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_node_put;
>  
> +	/* Set PHY_MODE as combo by default */
> +	qmp->init_mode = QPHY_MODE_COMBO;
> +
>  	qmp->usb_phy = devm_phy_create(dev, usb_np, &qmp_combo_usb_phy_ops);
>  	if (IS_ERR(qmp->usb_phy)) {
>  		ret = PTR_ERR(qmp->usb_phy);
> 
> -- 
> 2.34.1

-- 
~Vinod