Re: [PATCH v4] PCI: keystone: Fix pci_ops for AM654x SoC

From: Siddharth Vadapalli
Date: Tue Mar 26 2024 - 00:59:43 EST


On Mon, Mar 25, 2024 at 02:45:09PM +0100, Niklas Cassel wrote:
> Hello Siddharth,
>
> On Mon, Mar 25, 2024 at 05:52:28PM +0530, Siddharth Vadapalli wrote:
> > On Mon, Mar 25, 2024 at 12:23:05PM +0100, Niklas Cassel wrote:
> > > On Mon, Mar 25, 2024 at 11:07:22AM +0530, Siddharth Vadapalli wrote:
> > > > @@ -822,6 +788,23 @@ static int __init ks_pcie_host_init(struct dw_pcie_rp *pp)
> > > > if (ret < 0)
> > > > return ret;
> > > >
> > >
> > > > + if (!ks_pcie->is_am6) {
> > >
> > > Perhaps add a comment here stating WHY this is needed for v3.65a (!is_am6).
> > >
> > > From reading the old threads, it appears that v3.65a:
> > > -Has no support for iATUs. iATU-specific resource handling code is to be
> > > bypassed for v3.65 h/w. Thus v3.65a has it's own .child_ops implementation,
> > > so that pcie-designware-host.c does not configure the iATUs.
> > > -v3.65a has it's own .msi_init implementation, so that pcie-designware-host.c
> > > does not call dw_pcie_msi_host_init() to configure the MSI controller.
> > >
> > > While 4.90a:
> > > -Does have iATU support.
> > > -Does use the generic dw_pcie_msi_host_init().
> > >
> > > Considering the major differences (with v3.65a being the outlier) here,
> > > I think it would have been a much wiser idea to have two different glue
> > > drivers for these two compatibles (ti,keystone-pcie and ti,am654-pcie-rc).
> > >
> > > Right now the driver is quite hard to read, most of the functions in this
> > > driver exist because v3.65a does not have an iATU and does not use the
> > > generic DWC way to handle MSIs. Additionally, you have "if (!ks_pcie->is_am6)"
> > > spread out all over the driver, to control quite major things, like if you
> > > should overload .child_ops, or if you should set up inbound translation without
> > > an iATU. This makes is even harder to see which code is actually used for
> > > am654... like the fact that it actually uses the generic way to handle MSIs...
> > >
> > > The driver for am654 would be much nicer since many of the functions in
> > > this driver would not be needed (and the fact that you have only implemented
> > > EP support for am654 and not for v3.65a). All EP related stuff would be in
> > > the am654 file/driver.
> > > You could keep the quirky stuff for v3.65a in the existing pci-keystone.c
> > > driver.
> > >
> > > (I guess if there is a function that is identical between the twos, you could
> > > have a pci-keystone-common.{c,h} that can be used by both drivers, but from
> > > the looks of it, they seem to share very little code.
> >
> > Thank you for reviewing the patch. I agree that two drivers will be
> > better considering the !ks_pcie->is_am6 present throughout the driver.
> > However, I hope you notice the fact that commit:
> > 6ab15b5e7057 PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus
> > introduced a regression in a driver which was working prior to that
> > commit for AM654. While there are flaws in the driver and it needs to be
> > split to handle v3.65a and other versions in a cleaner manner, I am
> > unable to understand why that is a precursor to fixing the regression.
> >
> > If splitting the driver is the only way to fix this regression, please
> > let me know and I will work on that instead, though it will take up more
> > time.
>
> I think you are misunderstanding me.
>
> I think this patch is fine, except for the comment that I gave:
> "Perhaps add a comment here stating WHY this is needed for v3.65a (!is_am6)."
>
> Like:
>
> /*
> * This is only needed for !am654 since it has its own msi_irq_chip
> * implementation. (am654 uses the generic msi_irq_chip implementation.)
> */
> if (!ks_pcie->is_am6) {
> ...
> }
>
>
> In fact, if you move this code to ks_pcie_msi_host_init(), instead of
> ks_pcie_host_init(), you would not need a comment (or a if (!ks_pcie->is_am6)),
> since ks_pcie_msi_host_init() is only executed by !am654.

This seems much better :)

In the current code, the execution is as follows:

ks_pcie_probe()
dw_pcie_host_init()
pci_host_probe()
ks_pcie_v3_65_add_bus()

Moving the contents of ks_pcie_v3_65_add_bus() to ks_pcie_msi_host_init()
will result in:

ks_pcie_probe()
dw_pcie_host_init()
if (pci_msi_enabled())
if (pp->ops->msi_init) {
ret = pp->ops->msi_init(pp);
ks_pcie_msi_host_init()
pci_host_probe()

I will update this patch based on your suggestion. If it's alright, may I
also add your "Suggested-by" tag for the v5 patch? Please let me know.

>
>
>
>
> My suggestion to split this driver to two different drivers is just because
> I noticed how different they are (am654 has iATUs, uses generic msi_irq_chip
> implementation and has EP-mode support. !am654 has no iATUs, its own MSI
> implementation and no EP-mode support.)
>
> So the am654 driver would look like most other DWC glue drivers.
> The non-am654 driver would look mostly like it looks today, except you would
> remove the EP-mode support.
>
> However, this suggestion can of course be implemented sometime in the future
> and should not be a blocker for the patch in $subject.

Thank you for clarifying.

Regards,
Siddharth.