Re: [PATCH V8 00/12] soc: imx8mp: Add support for HDMI

[Tommaso Merciai]

Hi Adam, Lucas,
Thanks for this series.

This series make HDMI work on evk.
All is working properly on my side.

Tested on: Linux imx8mp-lpddr4-evk 6.9.0-rc1.
Hope this help.

Tested-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx>

Thanks & Regards,
Tommaso

On Sat, Feb 03, 2024 at 10:52:40AM -0600, Adam Ford wrote:
> The i.MX8M Plus has an HDMI controller, but it depends on two
> other systems, the Parallel Video Interface (PVI) and the
> HDMI PHY from Samsung. The LCDIF controller generates the display
> and routes it to the PVI which converts passes the parallel video
> to the HDMI bridge.  The HDMI system has a corresponding power
> domain controller whose driver was partially written, but the
> device tree for it was never applied, so some changes to the
> power domain should be harmless because they've not really been
> used yet.
> 
> This series is adapted from multiple series from Lucas Stach with
> edits and suggestions from feedback from various series, but it
> since it's difficult to use and test them independently,
> I merged them into on unified series.  The version history is a
> bit ambiguous since different components were submitted at different
> times and had different amount of retries.  In an effort to merge them
> I used the highest version attempt.
> 
> Adam Ford (3):
>   dt-bindings: soc: imx: add missing clock and power-domains to
>     imx8mp-hdmi-blk-ctrl
>   pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix
>     domain
>   arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
> 
> Lucas Stach (9):
>   dt-bindings: phy: add binding for the i.MX8MP HDMI PHY
>   phy: freescale: add Samsung HDMI PHY
>   arm64: dts: imx8mp: add HDMI power-domains
>   arm64: dts: imx8mp: add HDMI irqsteer
>   dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
>   drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
>   dt-bindings: display: imx: add binding for i.MX8MP HDMI TX
>   drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
>   arm64: dts: imx8mp: add HDMI display pipeline
> 
>  .../display/bridge/fsl,imx8mp-hdmi-tx.yaml    |  102 ++
>  .../display/imx/fsl,imx8mp-hdmi-pvi.yaml      |   84 ++
>  .../bindings/phy/fsl,imx8mp-hdmi-phy.yaml     |   62 +
>  .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |   22 +-
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi     |  145 +++
>  arch/arm64/configs/defconfig                  |    1 +
>  drivers/gpu/drm/bridge/imx/Kconfig            |   18 +
>  drivers/gpu/drm/bridge/imx/Makefile           |    2 +
>  drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c  |  207 ++++
>  drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c   |  154 +++
>  drivers/phy/freescale/Kconfig                 |    6 +
>  drivers/phy/freescale/Makefile                |    1 +
>  drivers/phy/freescale/phy-fsl-samsung-hdmi.c  | 1075 +++++++++++++++++
>  drivers/pmdomain/imx/imx8mp-blk-ctrl.c        |   10 +-
>  14 files changed, 1876 insertions(+), 13 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
>  create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> 
> -- 
> 2.43.0
> 
>