[PATCH 3/4] arm64: dts: rockchip: add wolfvision pf5 mainboard

From: Michael Riesch
Date: Mon Mar 25 2024 - 12:24:42 EST


Add device tree for the WolfVision PF5 mainboard. It features
- Rockchip RK3568 SoC
- eMMC
- RTC with backup battery
- on-board PDM microphone
- 12V DC jack
- HDMI output
- USB-C device port
as well as various expansion headers for different extension boards.

Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3568-wolfvision-pf5.dts | 528 +++++++++++++++++++++
2 files changed, 529 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index f906a868b71a..8fb35a363e4f 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
new file mode 100644
index 000000000000..a814749eaa97
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree for the WolfVision PF5 mainboard.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/regulator/ti,tps62864.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "WolfVision PF5";
+ compatible = "wolfvision,rk3568-pf5", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ mmc0 = &sdhci;
+ rtc0 = &pcf85623;
+ rtc1 = &rk809;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ hdmi_tx: hdmi-tx-connector {
+ compatible = "hdmi-connector";
+ hdmi-pwr-supply = <&hdmi_tx_5v>;
+ type = "a";
+
+ port {
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
+ hdmi_tx_5v: hdmi-tx-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_tx_5v_en>;
+ regulator-name = "hdmi_tx_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ pdm_codec: pdm-codec {
+ compatible = "dmic-codec";
+ num-channels = <1>;
+ #sound-dai-cells = <0>;
+ };
+
+ pdm_sound: pdm-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "microphone";
+
+ simple-audio-card,cpu {
+ sound-dai = <&pdm>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&pdm_codec>;
+ };
+ };
+
+ vcc12v_in: vcc12v-in-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "12v_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc12v_cam: vcc12v-cam-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc12v_cam_en>;
+ regulator-name = "12v_cam";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc12v_in>;
+ };
+
+ vcc5v_in: vcc5v-in-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "5v_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_in>;
+ };
+
+ vcc3v8_cam: vcc3v8-cam-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v8_cam_en>;
+ regulator-name = "3v8_cam";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v_in>;
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&gpu {
+ mali-supply = <&vcc0v9_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vcc0v9a_image>;
+ avdd-1v8-supply = <&vcc1v8a_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc5v_in>;
+ vcc2-supply = <&vcc5v_in>;
+ vcc3-supply = <&vcc5v_in>;
+ vcc4-supply = <&vcc5v_in>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc5v_in>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ wakeup-source;
+
+ regulators {
+ vcc0v9_logic: DCDC_REG1 {
+ regulator-name = "0v9_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9_gpu: DCDC_REG2 {
+ regulator-name = "0v9_gpu";
+ regulator-always-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v1_ddr4: DCDC_REG3 {
+ regulator-name = "1v1_ddr4";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc0v9_npu: DCDC_REG4 {
+ regulator-name = "0v9_npu";
+ regulator-always-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8: DCDC_REG5 {
+ regulator-name = "1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a_image: LDO_REG1 {
+ regulator-name = "0v9a_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a: LDO_REG2 {
+ regulator-name = "0v9a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a_pmu: LDO_REG3 {
+ regulator-name = "0v9a_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc3v3_acodec: LDO_REG4 {
+ regulator-name = "3v3_acodec";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG5 {
+ regulator-name = "3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc1v8a: LDO_REG7 {
+ regulator-name = "1v8a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8a_pmu: LDO_REG8 {
+ regulator-name = "1v8a_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8a_image: LDO_REG9 {
+ regulator-name = "1v8a_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sw: SWITCH_REG1 {
+ regulator-name = "3v3_sw";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ regulator@42 {
+ compatible = "ti,tps62869";
+ reg = <0x42>;
+
+ regulators {
+ vcc0v9_cpu: SW {
+ regulator-name = "0v9_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <TPS62864_MODE_FPWM>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1150000>;
+ vin-supply = <&vcc5v_in>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ pcf85623: rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk32k_in>;
+ quartz-load-femtofarads = <12500>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+&pdm {
+ pinctrl-0 = <&pdmm0_clk
+ &pdmm0_sdi0>;
+ status = "okay";
+};
+
+&pinctrl {
+ cam {
+ vcc12v_cam_en: vcc12v-cam-en-pinctrl {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc3v8_cam_en: vcc3v8-cam-en-pinctrl {
+ rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmitx {
+ hdmi_tx_5v_en: hdmi-tx-5v-en-pinctrl {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l-pinctrl {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vcc3v3_acodec>;
+ vccio2-supply = <&vcc1v8>;
+ vccio3-supply = <&vcc3v3_sd>;
+ vccio4-supply = <&vcc1v8>;
+ vccio5-supply = <&vcc1v8>;
+ vccio6-supply = <&vcc3v3_sw>;
+ vccio7-supply = <&vcc3v3_sw>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc1v8a>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc3v3_sw>;
+ vqmmc-supply = <&vcc1v8>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ /* The following quirks are required since the bInterval is 1 and we
+ * handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3
+ * ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries").
+ */
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ /*
+ * Without this quirk the available fifosize seems to be miscalculated
+ * in cases where many endpoints are used. In one particular situation
+ * 8 IN EPs and 3 OUT EPs where selected and lead to stalled transfers
+ * without the resize quirk.
+ */
+ tx-fifo-resize;
+
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP2>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};

--
2.34.1