Re: [PATCH v16 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

From: Krishna Kurapati PSSNV
Date: Mon Mar 25 2024 - 11:46:51 EST




On 3/25/2024 6:18 PM, Johan Hovold wrote:
On Thu, Mar 07, 2024 at 11:50:50AM +0530, Krishna Kurapati wrote:
On multiport supported controllers, each port has its own DP/DM
and SS (if super speed capable) interrupts. As per the bindings,
their interrupt names differ from standard ones having "_x" added
as suffix (x indicates port number). Identify from the interrupt
names whether the controller is a multiport controller or not.
Refactor dwc3_qcom_setup_irq() call to parse multiport interrupts
along with non-multiport ones accordingly..

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-qcom.c | 146 +++++++++++++++++++++++++++--------
1 file changed, 112 insertions(+), 34 deletions(-)

This is much better. Just a couple of nits below.

+static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
+{
+ const char *irq_name;
+ int port_index;
+ int irq;
+
+ irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
+ if (irq > 0)
+ return 1;
+
+ irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
+ if (irq > 0)
+ return 1;
+
+ for (port_index = 0; port_index < DWC3_MAX_PORTS; port_index++) {
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_index + 1);

Please use a stack allocated buffer for these strings as we don't need
them any more after this function returns.


Sure. Will replace this with "char irq_name[14]".

+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
+ if (irq <= 0)
+ return port_index;
+ }
+
+ return port_index;

I think explicitly returning DWC3_MAX_PORTS here would be more readable.


Will make this change.

+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ bool is_multiport;
+ int ret;
+ int i;
+
+ qcom->num_ports = dwc3_qcom_find_num_ports(pdev);
+ if (qcom->num_ports < 0)
+ return -ENOMEM;

Just return 'ret' directly.

Sure, will init ret to -ENOMEM and return ret here.


+
+ is_multiport = (qcom->num_ports > 1) ? true : false;

And no need for the ternary operator:
ACK.


is_multiport = (qcom->num_ports > 1);

+
+ for (i = 0; i < qcom->num_ports; i++) {
+ ret = dwc3_qcom_setup_port_irq(pdev, i, is_multiport);
if (ret)
return ret;
- qcom->ss_phy_irq = irq;
}
return 0;

With that fixed:

Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

Thanks for the review

Regards,
Krishna,