[PATCH 6.6 232/638] arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

From: Sasha Levin
Date: Mon Mar 25 2024 - 07:33:42 EST


From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

[ Upstream commit af6f6778d34cb40e60368e288767f674cc0c5f60 ]

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Stable-dep-of: 7c38989d0f7a ("arm64: dts: qcom: sm8150: correct PCIe wake-gpios")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 26b6d84548a56..a3e801fe6fee4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1876,7 +1876,7 @@ pcie0: pci@1c00000 {
phys = <&pcie0_lane>;
phy-names = "pciephy";

- perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;

pinctrl-names = "default";
@@ -1978,7 +1978,7 @@ pcie1: pci@1c08000 {
phys = <&pcie1_lane>;
phy-names = "pciephy";

- perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;

pinctrl-names = "default";
--
2.43.0