Re: [PATCH] ACPI: docs: enumeration: Make footnotes links

[Rafael J. Wysocki]

On Wed, Mar 13, 2024 at 10:40 PM Chris Packham
<chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:
>
> Update the numeric footnotes so that they are rendered as hyperlinks in
> the html output.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/firmware-guide/acpi/enumeration.rst | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst
> index d79f69390991..0165b09c0957 100644
> --- a/Documentation/firmware-guide/acpi/enumeration.rst
> +++ b/Documentation/firmware-guide/acpi/enumeration.rst
> @@ -595,7 +595,7 @@ bridges/switches of the board.
>
>  For example, let's assume we have a system with a PCIe serial port, an
>  Exar XR17V3521, soldered on the main board. This UART chip also includes
> -16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
> +16 GPIOs and we want to add the property ``gpio-line-names`` [1]_ to these pins.
>  In this case, the ``lspci`` output for this component is::
>
>         07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03)
> @@ -637,7 +637,7 @@ of the chipset bridge (also called "root port") with address::
>         Bus: 0 - Device: 14 - Function: 1
>
>  To find this information, it is necessary to disassemble the BIOS ACPI tables,
> -in particular the DSDT (see also [2])::
> +in particular the DSDT (see also [2]_)::
>
>         mkdir ~/tables/
>         cd ~/tables/
> @@ -667,7 +667,7 @@ device::
>                         }
>         ... other definitions follow ...
>
> -and the _ADR method [3] returns exactly the device/function couple that
> +and the _ADR method [3]_ returns exactly the device/function couple that
>  we are looking for. With this information and analyzing the above ``lspci``
>  output (both the devices list and the devices tree), we can write the following
>  ACPI description for the Exar PCIe UART, also adding the list of its GPIO line
> @@ -724,10 +724,10 @@ created analyzing the position of the Exar UART in the PCI bus topology.
>  References
>  ==========
>
> -[1] Documentation/firmware-guide/acpi/gpio-properties.rst
> +.. [1] Documentation/firmware-guide/acpi/gpio-properties.rst
>
> -[2] Documentation/admin-guide/acpi/initrd_table_override.rst
> +.. [2] Documentation/admin-guide/acpi/initrd_table_override.rst
>
> -[3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address)
> +.. [3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address)
>      https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf,
>      referenced 2020-11-18
> --

Applied as 6.9-rc material, thanks!