Re: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f

[Arınç ÜNAL]

Hello Heiko.

On 14.03.2024 15:31, Heiko Stübner wrote:
> Am Donnerstag, 14. März 2024, 13:24:35 CET schrieb Arınç ÜNAL via B4 Relay:
> > From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> >
> > The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
> > findings that support this. There's no bootstrapping option to change the
> > PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
> > address of the switch. So the reg property on the device tree is currently
> > ignored by the Linux driver.
> >
> > Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
> > has this switch.
> >
> > Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
>
> Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")

Do I need to resubmit with this added, or would you add it while applying
the patch?

Arınç