[PATCH] arm64: dts: qcom: apq8016-sbc: correct GPIO LEDs node names

From: Krzysztof Kozlowski
Date: Thu Mar 14 2024 - 07:27:26 EST


Individual LEDs in a GPIO LEDs device node are not addressable, thus
unit address is not correct.

dtc is also not happy:

Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property

Reported-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
Closes: https://lore.kernel.org/all/CAFA6WYNRwF7GqhBk2B7i-deT3aLxNQckhnOasjip2TYm4HZgAw@xxxxxxxxxxxxxx/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 9ffad7d1f2b6..aba08424aa38 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -91,7 +91,7 @@ leds {

compatible = "gpio-leds";

- led@1 {
+ led-1 {
label = "apq8016-sbc:green:user1";
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_GREEN>;
@@ -100,7 +100,7 @@ led@1 {
default-state = "off";
};

- led@2 {
+ led-2 {
label = "apq8016-sbc:green:user2";
function = LED_FUNCTION_DISK_ACTIVITY;
color = <LED_COLOR_ID_GREEN>;
@@ -109,7 +109,7 @@ led@2 {
default-state = "off";
};

- led@3 {
+ led-3 {
label = "apq8016-sbc:green:user3";
function = LED_FUNCTION_DISK_ACTIVITY;
color = <LED_COLOR_ID_GREEN>;
@@ -118,7 +118,7 @@ led@3 {
default-state = "off";
};

- led@4 {
+ led-4 {
label = "apq8016-sbc:green:user4";
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
@@ -127,7 +127,7 @@ led@4 {
default-state = "off";
};

- led@5 {
+ led-5 {
label = "apq8016-sbc:yellow:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_YELLOW>;
@@ -136,7 +136,7 @@ led@5 {
default-state = "off";
};

- led@6 {
+ led-6 {
label = "apq8016-sbc:blue:bt";
function = LED_FUNCTION_BLUETOOTH;
color = <LED_COLOR_ID_BLUE>;
--
2.34.1