Re: [PATCH v9 3/3] Input: Add TouchNetix axiom i2c touchscreen driver

[Kamel Bouhara]

Le Wed, Mar 13, 2024 at 09:21:35PM +0100, Marco Felsch a écrit :
> Hi Kamel,
>
Hi Marco,

> please see below, be aware that this is just an rough review.
>

[...]

> > +
> > +static int axiom_i2c_probe(struct i2c_client *client)
> > +{
> > +	struct device *dev = &client->dev;
> > +	struct input_dev *input_dev;
> > +	struct axiom_data *ts;
> > +	u32 poll_interval;
> > +	int target;
> > +	int error;
> > +
> > +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > +	if (!ts)
> > +		return -ENOMEM;
> > +
> > +	i2c_set_clientdata(client, ts);
> > +	ts->client = client;
> > +	ts->dev = dev;
> > +
> > +	ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config);
> > +	error = PTR_ERR_OR_ZERO(ts->regmap);
> > +	if (error) {
> > +		dev_err(dev, "Failed to initialize regmap: %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > +	if (IS_ERR(ts->reset_gpio))
> > +		return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n");
> > +
> > +	if (ts->reset_gpio)
> > +		axiom_reset(ts->reset_gpio);
>
> This seems useless, since you doing an reset without enabling the power
> supply (below). I know there are systems which do have the supply always
> connected or for ACPI the supply is managed via firmware, but the driver
> should implement the correct logic and for DT/OF case this is not
> correct.
>

Alright, this can be moved after enabling vdda regulator as this is
still required in the power sequence.

> > +
> > +	ts->vddi = devm_regulator_get_optional(dev, "vddi");
> > +	if (!IS_ERR(ts->vddi)) {
> > +		error = devm_regulator_get_enable(dev, "vddi");
>
> Regulators are ref counted and now you request the regulator twice. Also
> the regulator is not optional, it is required for the device to work.
> Same applies to the vdda below.
>

Ack, I wrongly took my use case (ACPI + fixed regulators) but this isn't
a common use case.

> > +		if (error)
> > +			return dev_err_probe(&client->dev, error,
> > +					     "Failed to enable vddi regulator\n");
> > +	}
> > +
> > +	ts->vdda = devm_regulator_get_optional(dev, "vdda");
> > +	if (!IS_ERR(ts->vdda)) {
> > +		error = devm_regulator_get_enable(dev, "vdda");
> > +		if (error)
> > +			return dev_err_probe(&client->dev, error,
> > +					     "Failed to enable vdda regulator\n");
> > +		msleep(AXIOM_STARTUP_TIME_MS);
> > +	}
> > +
> > +	error = axiom_discover(ts);
> > +	if (error)
> > +		return dev_err_probe(dev, error, "Failed touchscreen discover\n");
> > +
> > +	input_dev = devm_input_allocate_device(ts->dev);
> > +	if (!input_dev)
> > +		return -ENOMEM;
> > +
> > +	input_dev->name = "TouchNetix axiom Touchscreen";
> > +	input_dev->phys = "input/axiom_ts";
> > +
> > +	input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0);
> > +	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0);
> > +	input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
> > +	input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0);
> > +	input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0);
> > +
> > +	touchscreen_parse_properties(input_dev, true, &ts->prop);
> > +
> > +	/* Registers the axiom device as a touchscreen instead of a mouse pointer */
> > +	error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT);
> > +	if (error)
> > +		return error;
> > +
> > +	/* Enables the raw data for up to 4 force channels to be sent to the input subsystem */
> > +	set_bit(EV_REL, input_dev->evbit);
> > +	set_bit(EV_MSC, input_dev->evbit);
> > +	/* Declare that we support "RAW" Miscellaneous events */
> > +	set_bit(MSC_RAW, input_dev->mscbit);
> > +
> > +	ts->input_dev = input_dev;
> > +	input_set_drvdata(ts->input_dev, ts);
> > +
> > +	/* Ensure that all reports are initialised to not be present. */
> > +	for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++)
> > +		ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT;
> > +
> > +	error = devm_request_threaded_irq(dev, client->irq, NULL,
> > +					  axiom_irq, IRQF_ONESHOT, dev_name(dev), ts);
> > +	if (error) {
> > +		dev_info(dev, "Request irq failed, falling back to polling mode");
> > +
> > +		error = input_setup_polling(input_dev, axiom_i2c_poll);
> > +		if (error)
> > +			return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n");
> > +
> > +		if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval))
>
> This is not wrong but can we move the "poll-intervall" parsing into
> touchscreen_parse_properties() since it seems pretty common to me.

Maybe too late to add it in this series :).

>
> > +			input_set_poll_interval(input_dev, poll_interval);
> > +		else
> > +			input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS);
> > +	}
> > +
> > +	error = input_register_device(input_dev);
> > +	if (error)
> > +		return dev_err_probe(ts->dev, error,
> > +				     "Could not register with Input Sub-system.\n");
>
> 	return input_register_device(input_dev);

Ack, thanks.

>
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id axiom_i2c_id_table[] = {
> > +	{ "ax54a" },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table);
>
> Do we really need an i2c-id table here? Most platforms do either use OF
> or ACPI.

If not wrong this is used to enumarate the device from userspace
and in my case it is required as there is no direct i2c controller
exposed from ACPI pov.

Thanks !

--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com