Re: [PATCH RFC v2 1/6] ethtool: add interface to read Tx hardware timestamping statistics

[Rahul Rameshbabu]

On Tue, 12 Mar, 2024 16:53:46 -0700 Jakub Kicinski <kuba@xxxxxxxxxx> wrote:
> On Sat,  9 Mar 2024 00:44:35 -0800 Rahul Rameshbabu wrote:
>> Multiple network devices that support hardware timestamping appear to have
>> common behavior with regards to timestamp handling. Implement common Tx
>> hardware timestamping statistics in a tx_stats struct_group. Common Rx
>> hardware timestamping statistics can subsequently be implemented in a
>> rx_stats struct_group for ethtool_ts_stats.
>
>>  Documentation/netlink/specs/ethtool.yaml | 20 +++++++++
>>  include/linux/ethtool.h                  | 21 ++++++++++
>>  include/uapi/linux/ethtool_netlink.h     | 15 +++++++
>>  net/ethtool/tsinfo.c                     | 52 +++++++++++++++++++++++-
>>  4 files changed, 107 insertions(+), 1 deletion(-)
>
> Feels like we should mention the new stats somehow in 
> Documentation/networking/ethtool-netlink.rst
>
>> diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
>> index 197208f419dc..f99b003c78c0 100644
>> --- a/Documentation/netlink/specs/ethtool.yaml
>> +++ b/Documentation/netlink/specs/ethtool.yaml
>> @@ -559,6 +559,21 @@ attribute-sets:
>>        -
>>          name: tx-lpi-timer
>>          type: u32
>> +  -
>> +    name: ts-stat
>> +    attributes:
>> +      -
>> +        name: pad
>> +        type: pad
>
> You can remove the pad entry, and...
>
>> +      -
>> +        name: tx-pkts
>> +        type: u64
>
> ...use the uint type for the stats
>
>> +      -
>> +        name: tx-lost
>> +        type: u64
>> +      -
>> +        name: tx-err
>> +        type: u64
>>    -
>>      name: tsinfo
>>      attributes:
>
>> +/**
>> + * struct ethtool_ts_stats - HW timestamping statistics
>> + * @tx_stats: struct group for TX HW timestamping
>> + *	@pkts: Number of packets successfully timestamped by the queried
>> + *	      layer.
>> + *	@lost: Number of packet timestamps that failed to get applied on a
>> + *	      packet by the queried layer.
>> + *	@err: Number of timestamping errors that occurred on the queried
>> + *	     layer.
>
> the kdocs for @lost and @err are not very clear

Makes sense given that these are stale and should have been changed
between my v1 and v2. Here is my new attempt at this.

 /**
  * struct ethtool_ts_stats - HW timestamping statistics
  * @tx_stats: struct group for TX HW timestamping
  *	@pkts: Number of packets successfully timestamped by the hardware.
  *	@lost: Number of hardware timestamping requests where the timestamping
  *            information from the hardware never arrived for submission with
  *            the skb.
  *	@err: Number of arbitrary timestamp generation error events that the
  *           hardware encountered.
  */


>
>> + * @get_ts_stats: Query the device hardware timestamping statistics.
>
> Let's copy & paste the "Drivers must not zero" text in here?
> People seem to miss that requirement anyway, but at least we'll
> have something to point at in review.
>
>> +enum {
>> +	ETHTOOL_A_TS_STAT_UNSPEC,
>> +	ETHTOOL_A_TS_STAT_PAD,
>> +
>> +	ETHTOOL_A_TS_STAT_TX_PKT,			/* array, u64 */
>> +	ETHTOOL_A_TS_STAT_TX_LOST,			/* array, u64 */
>> +	ETHTOOL_A_TS_STAT_TX_ERR,			/* array, u64 */
>
> I don't think these are arrays.

Sorry, copy-paste mistake from FEC stats....

>
>> +
>> +	/* add new constants above here */
>> +	__ETHTOOL_A_TS_STAT_CNT,
>> +	ETHTOOL_A_TS_STAT_MAX = (__ETHTOOL_A_TS_STAT_CNT - 1)
>> +
>> +};

Agreed with all the comments here. Have accounted for them in my patches
for my next submission (aiming for non-RFC once the net-next window is
open again).

--
Thanks,

Rahul Rameshbabu