Re: [GIT PULL] Thermal material for v6.9-rc1

[Rafael J. Wysocki]

Hi Daniel,

On Wed, Mar 13, 2024 at 3:06 PM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
>
>
> Hi Rafael,
>
> The following changes since commit dcb497ec993265dfc5fffa60b486c1ad353e9ad5:
>
>    Merge branches 'thermal-core' and 'thermal-intel' (2024-03-07
> 21:05:12 +0100)
>
> are available in the Git repository at:
>
>
> ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.9-rc1
>
> for you to fetch changes up to 1828c1c17bb2adf3a3f26abc69cb3fe971eac0e4:
>
>    thermal/drivers/rcar_gen3: Add support for R-Car V4M (2024-03-11
> 17:14:46 +0100)
>
> ----------------------------------------------------------------
> - Fix memory leak in the error path at probe time in the Mediatek LVTS
>    driver (Christophe Jaillet)
>
> - Fix control buffer enablement regression on Meditek MT7896 (Frank
>    Wunderlich)
>
> - Drop spaces before TABs in different places: thermal-of, ST drivers
>    and Makefile (Geert Uytterhoeven)
>
> - Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
>    among several SoC versions (Fabio Estevam)
>
> - Add support for H616 THS controller for the Sun8i platforms. Note
>    that this change relies on another change in the SoC specific code
>    which is included in this branch (Martin Botka)
>
> - Don't fail probe due to zone registration failure because there is
>    no trip points defined in the DT (Mark Brown)
>
> - Support variable TMU array size for new platforms (Peng Fan)
>
> - Adjust the DT binding for thermal-of and make the polling time not
>    required and assume it is zero when not found in the DT (Konrad
>    Dybcio)
>
> - Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)
>
> ----------------------------------------------------------------
> Andre Przywara (3):
>        soc: sunxi: sram: export register 0 for THS on H616
>        thermal/drivers/sun8i: Explain unknown H6 register value
>        thermal/drivers/sun8i: Add SRAM register access code
>
> Christophe JAILLET (1):
>        thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an
> error handling path
>
> Duy Nguyen (1):
>        dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
>
> Fabio Estevam (1):
>        dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range
> min/maxItems
>
> Frank Wunderlich (1):
>        thermal/drivers/mediatek: Fix control buffer enablement on MT7896
>
> Geert Uytterhoeven (2):
>        thermal: Drop spaces before TABs
>        thermal/drivers/rcar_gen3: Add support for R-Car V4M
>
> Konrad Dybcio (2):
>        dt-bindings: thermal-zones: Don't require polling-delay(-passive)
>        thermal/of: Assume polling-delay(-passive) 0 when absent
>
> Maksim Kiselev (1):
>        thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
>
> Mark Brown (1):
>        thermal/drivers/sun8i: Don't fail probe due to zone registration
> failure
>
> Martin Botka (2):
>        dt-bindings: thermal: sun8i: Add H616 THS controller
>        thermal/drivers/sun8i: Add support for H616 THS controller
>
> Peng Fan (1):
>        thermal/drivers/qoriq: Fix getting tmu range
>
>   .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml |  34 +++--
>   .../devicetree/bindings/thermal/qoriq-thermal.yaml |   3 +-
>   .../bindings/thermal/rcar-gen3-thermal.yaml        |   2 +
>   .../devicetree/bindings/thermal/thermal-zones.yaml |   2 -
>   drivers/soc/sunxi/sunxi_sram.c                     |  22 ++++
>   drivers/thermal/Makefile                           |   2 +-
>   drivers/thermal/mediatek/auxadc_thermal.c          |   3 +
>   drivers/thermal/mediatek/lvts_thermal.c            |   4 +-
>   drivers/thermal/qoriq_thermal.c                    |  12 +-
>   drivers/thermal/rcar_gen3_thermal.c                |   4 +
>   drivers/thermal/st/st_thermal.h                    |  18 +--
>   drivers/thermal/st/st_thermal_memmap.c             |   2 +-
>   drivers/thermal/sun8i_thermal.c                    | 139
> +++++++++++++++++----
>   drivers/thermal/thermal_of.c                       |  14 ++-
>   14 files changed, 203 insertions(+), 58 deletions(-)
>
> --

Pulled, thanks!