Re: [PATCH v2 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

[Krzysztof Kozlowski]

On 13/03/2024 13:30, Sumit Garg wrote:
> Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
> Box Core board based on the Qualcomm APQ8016E SoC. For more information
> refer to the product page [1].
> 
> One of the major difference from db410c is serial port where HMIBSC board
> uses UART1 as the debug console with a default RS232 mode (UART1 mode mux
> configured via gpio99 and gpio100).
> 
> Support for Schneider Electric HMIBSC. Features:
> - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
> - 1GiB RAM
> - 8GiB eMMC, SD slot
> - WiFi and Bluetooth
> - 2x Host, 1x Device USB port
> - HDMI
> - Discrete TPM2 chip over SPI
> - USB ethernet adaptors (soldered)
> 
> This series is a v2 since v1 of this DTS file has been reviewed on the
> U-Boot mailing list [2].
> 
> Changes in v2:
> - Fix DT schema warnings.

Quick look tells me this is not the case.

Best regards,
Krzysztof