RE: [EXT] Re: [PATCH v8 05/10] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties

[Xu Yang]

> 
> On Tue, Mar 12, 2024 at 05:16:58PM +0800, Xu Yang wrote:
> > Add restrictions for reg, interrupts, clock and clock-names properties
> > for imx Socs.
> >
> > Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> >
> > ---
> > Changes in v4:
> >  - new patch since v3's discussion
> >  - split the reg, interrupts, clock and clock-names properties into
> >    common part and device-specific
> > Changes in v5:
> >  - keep common property unchanged
> >  - make if-then more readable
> >  - remove non imx part
> > Changes in v6:
> >  - new patch based on ci-hdrc-usb2-imx.yaml
> > Changes in v7:
> >  - no changes
> > Changes in v8:
> >  - remove if:else:if:else:if:else block
> > ---
> >  .../bindings/usb/chipidea,usb2-imx.yaml       | 80 +++++++++++++++++++
> >  1 file changed, 80 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > index cdbb224e9f68..fb1c378dfe88 100644
> > --- a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > @@ -49,6 +49,12 @@ properties:
> >            - const: fsl,imx6ul-usb
> >            - const: fsl,imx27-usb
> >
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> >    clocks:
> >      minItems: 1
> >      maxItems: 3
> > @@ -144,6 +150,80 @@ allOf:
> >              - const: idle
> >              - const: active
> >
> > +  # imx27 Soc needs three clocks
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          const: fsl,imx27-usb
> > +    then:
> > +      properties:
> > +        clocks:
> > +          minItems: 3
> > +          maxItems: 3
> 
> The max is already 3, so drop maxItems.

Okay.

> 
> > +        clock-names:
> > +          items:
> > +            - const: ipg
> > +            - const: ahb
> > +            - const: per
> > +
> > +  # imx25 and imx35 Soc need three clocks
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx25-usb
> > +              - fsl,imx35-usb
> > +    then:
> > +      properties:
> > +        clocks:
> > +          minItems: 3
> > +          maxItems: 3
> 
> Same here.

Okay.

> 
> > +        clock-names:
> > +          items:
> > +            - const: ipg
> > +            - const: ahb
> > +            - const: per
> > +
> > +  # imx7d Soc need one clock
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          items:
> > +            - const: fsl,imx7d-usb
> > +            - const: fsl,imx27-usb
> > +    then:
> > +      properties:
> > +        clocks:
> > +          maxItems: 1
> > +        clock-names:
> > +          maxItems: 1
> 
> What's the name?

Can I not specify the name since the macro definition for USB
controller clock in clock.h is recognizable and the driver doesn't
get this clock by name rather index?

Thanks,
Xu Yang