Re: [RFC PATCH v7 10/12] ACPI:RAS2: Add common library for RAS2 PCC interfaces

From: fan
Date: Tue Mar 12 2024 - 14:32:46 EST

Next message: Zi Yan: "Re: [PATCH v2] mm/migrate: put dest folio on deferred split list if source was there."
Previous message: Krzysztof Kozlowski: "[PATCH 4/4] ARM: dts: samsung: smdk4412: align keypad node names with dtschema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Feb 23, 2024 at 10:37:21PM +0800, shiju.jose@xxxxxxxxxx wrote:
> From: A Somasundaram <somasundaram.a@xxxxxxx>
>
> The code contains PCC interfaces for RAS2 table, functions to send
> RAS2 commands as per ACPI 6.5 & upwards revision.
>
> References for this implementation,
> ACPI specification 6.5 section 5.2.21 for RAS2 table and chapter 14
> for PCC (Platform Communication Channel).
>
> Driver uses PCC interfaces to communicate to the ACPI HW. This code
> implements PCC interfaces and the functions to send the RAS2 commands
> to be used by OSPM.
>
> Signed-off-by: A Somasundaram <somasundaram.a@xxxxxxx>
> Co-developed-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
> Signed-off-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
> ---
> drivers/acpi/Kconfig | 14 ++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/ras2_acpi_common.c | 272 ++++++++++++++++++++++++++++++++
> include/acpi/ras2_acpi.h | 59 +++++++
> 4 files changed, 346 insertions(+)
> create mode 100755 drivers/acpi/ras2_acpi_common.c
> create mode 100644 include/acpi/ras2_acpi.h
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 3c3f8037ebed..6f69c9976c4f 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -284,6 +284,20 @@ config ACPI_CPPC_LIB
> If your platform does not support CPPC in firmware,
> leave this option disabled.
>
> +config ACPI_RAS2
> + bool "ACPI RAS2 driver"
> + depends on ACPI_PROCESSOR
> + select MAILBOX
> + select PCC
> + help
> + The driver adds support for PCC (platform communication
> + channel) interfaces to communicate with the ACPI complaint
> + hardware platform supports RAS2(RAS2 Feature table).
> + The driver adds support for RAS2(extraction of RAS2
> + tables from OS system table), PCC interfaces and OSPM interfaces
> + to send RAS2 commands. Driver adds platform device which
> + binds to the RAS2 memory driver.
> +
> config ACPI_PROCESSOR
> tristate "Processor"
> depends on X86 || ARM64 || LOONGARCH
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 12ef8180d272..b12fba9cff06 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -105,6 +105,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
> obj-$(CONFIG_ACPI_BGRT) += bgrt.o
> obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
> obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
> +obj-$(CONFIG_ACPI_RAS2) += ras2_acpi_common.o
> obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
> obj-$(CONFIG_ACPI_PPTT) += pptt.o
> obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
> diff --git a/drivers/acpi/ras2_acpi_common.c b/drivers/acpi/ras2_acpi_common.c
> new file mode 100755
> index 000000000000..c6e4ed96cd81
> --- /dev/null
> +++ b/drivers/acpi/ras2_acpi_common.c
> @@ -0,0 +1,272 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ACPI RAS2 table processing common functions
> + *
> + * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises.
> + *
> + * Copyright (c) 2024 HiSilicon Limited.
> + *
> + * Support for
> + * RAS2 - ACPI 6.5 Specification, section 5.2.21
> + * PCC(Platform Communications Channel) - ACPI 6.5 Specification,
> + * chapter 14.
> + *
> + * Code contains common functions for RAS2.
> + * PCC(Platform communication channel) interfaces for the RAS2
> + * and the functions for sending RAS2 commands to the ACPI HW.
> + */
> +
> +#include <linux/export.h>
> +#include <linux/delay.h>
> +#include <linux/ktime.h>
> +#include <linux/platform_device.h>
> +#include <acpi/ras2_acpi.h>
> +#include <acpi/acpixf.h>
> +
> +static int ras2_check_pcc_chan(struct ras2_context *ras2_ctx)
> +{
> + struct acpi_ras2_shared_memory __iomem *generic_comm_base = ras2_ctx->pcc_comm_addr;
> + ktime_t next_deadline = ktime_add(ktime_get(), ras2_ctx->deadline);
> +
> + while (!ktime_after(ktime_get(), next_deadline)) {
> + /*
> + * As per ACPI spec, the PCC space wil be initialized by

s/wil/will/

Fan
> + * platform and should have set the command completion bit when
> + * PCC can be used by OSPM
> + */
> + if (readw_relaxed(&generic_comm_base->status) & RAS2_PCC_CMD_COMPLETE)
> + return 0;
> + /*
> + * Reducing the bus traffic in case this loop takes longer than
> + * a few retries.
> + */
> + udelay(10);
> + }
> +
> + return -EIO;
> +}
> +
> +/**
> + * ras2_send_pcc_cmd() - Send RAS2 command via PCC channel
> + * @ras2_ctx: pointer to the ras2 context structure
> + * @cmd: command to send
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +int ras2_send_pcc_cmd(struct ras2_context *ras2_ctx, u16 cmd)
> +{
> + int ret;
> + struct acpi_ras2_shared_memory *generic_comm_base =
> + (struct acpi_ras2_shared_memory *)ras2_ctx->pcc_comm_addr;
> + static ktime_t last_cmd_cmpl_time, last_mpar_reset;
> + struct mbox_chan *pcc_channel;
> + static int mpar_count;
> + unsigned int time_delta;
> +
> + if (cmd == RAS2_PCC_CMD_EXEC) {
> + ret = ras2_check_pcc_chan(ras2_ctx);
> + if (ret)
> + return ret;
> + }
> + pcc_channel = ras2_ctx->pcc_chan->mchan;
> +
> + /*
> + * Handle the Minimum Request Turnaround Time(MRTT)
> + * "The minimum amount of time that OSPM must wait after the completion
> + * of a command before issuing the next command, in microseconds"
> + */
> + if (ras2_ctx->pcc_mrtt) {
> + time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time);
> + if (ras2_ctx->pcc_mrtt > time_delta)
> + udelay(ras2_ctx->pcc_mrtt - time_delta);
> + }
> +
> + /*
> + * Handle the non-zero Maximum Periodic Access Rate(MPAR)
> + * "The maximum number of periodic requests that the subspace channel can
> + * support, reported in commands per minute. 0 indicates no limitation."
> + *
> + * This parameter should be ideally zero or large enough so that it can
> + * handle maximum number of requests that all the cores in the system can
> + * collectively generate. If it is not, we will follow the spec and just
> + * not send the request to the platform after hitting the MPAR limit in
> + * any 60s window
> + */
> + if (ras2_ctx->pcc_mpar) {
> + if (mpar_count == 0) {
> + time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset);
> + if (time_delta < 60 * MSEC_PER_SEC) {
> + dev_dbg(ras2_ctx->dev,
> + "PCC cmd not sent due to MPAR limit");
> + return -EIO;
> + }
> + last_mpar_reset = ktime_get();
> + mpar_count = ras2_ctx->pcc_mpar;
> + }
> + mpar_count--;
> + }
> +
> + /* Write to the shared comm region. */
> + writew_relaxed(cmd, &generic_comm_base->command);
> +
> + /* Flip CMD COMPLETE bit */
> + writew_relaxed(0, &generic_comm_base->status);
> +
> + /* Ring doorbell */
> + ret = mbox_send_message(pcc_channel, &cmd);
> + if (ret < 0) {
> + dev_err(ras2_ctx->dev,
> + "Err sending PCC mbox message. cmd:%d, ret:%d\n",
> + cmd, ret);
> + return ret;
> + }
> +
> + /*
> + * For READs we need to ensure the cmd completed to ensure
> + * the ensuing read()s can proceed. For WRITEs we dont care
> + * because the actual write()s are done before coming here
> + * and the next READ or WRITE will check if the channel
> + * is busy/free at the entry of this call.
> + *
> + * If Minimum Request Turnaround Time is non-zero, we need
> + * to record the completion time of both READ and WRITE
> + * command for proper handling of MRTT, so we need to check
> + * for pcc_mrtt in addition to CMD_READ
> + */
> + if (cmd == RAS2_PCC_CMD_EXEC || ras2_ctx->pcc_mrtt) {
> + ret = ras2_check_pcc_chan(ras2_ctx);
> + if (ras2_ctx->pcc_mrtt)
> + last_cmd_cmpl_time = ktime_get();
> + }
> +
> + if (pcc_channel->mbox->txdone_irq)
> + mbox_chan_txdone(pcc_channel, ret);
> + else
> + mbox_client_txdone(pcc_channel, ret);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ras2_send_pcc_cmd);
> +
> +/**
> + * ras2_register_pcc_channel() - Register PCC channel
> + * @ras2_ctx: pointer to the ras2 context structure
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +int ras2_register_pcc_channel(struct ras2_context *ras2_ctx)
> +{
> + u64 usecs_lat;
> + unsigned int len;
> + struct pcc_mbox_chan *pcc_chan;
> + struct mbox_client *ras2_mbox_cl;
> + struct acpi_pcct_hw_reduced *ras2_ss;
> +
> + ras2_mbox_cl = &ras2_ctx->mbox_client;
> + if (!ras2_mbox_cl || ras2_ctx->pcc_subspace_idx < 0)
> + return -EINVAL;
> +
> + pcc_chan = pcc_mbox_request_channel(ras2_mbox_cl,
> + ras2_ctx->pcc_subspace_idx);
> +
> + if (IS_ERR(pcc_chan)) {
> + dev_err(ras2_ctx->dev,
> + "Failed to find PCC channel for subspace %d\n",
> + ras2_ctx->pcc_subspace_idx);
> + return -ENODEV;
> + }
> + ras2_ctx->pcc_chan = pcc_chan;
> + /*
> + * The PCC mailbox controller driver should
> + * have parsed the PCCT (global table of all
> + * PCC channels) and stored pointers to the
> + * subspace communication region in con_priv.
> + */
> + ras2_ss = pcc_chan->mchan->con_priv;
> +
> + if (!ras2_ss) {
> + dev_err(ras2_ctx->dev, "No PCC subspace found for RAS2\n");
> + pcc_mbox_free_channel(ras2_ctx->pcc_chan);
> + return -ENODEV;
> + }
> +
> + /*
> + * This is the shared communication region
> + * for the OS and Platform to communicate over.
> + */
> + ras2_ctx->comm_base_addr = ras2_ss->base_address;
> + len = ras2_ss->length;
> + dev_dbg(ras2_ctx->dev, "PCC subspace for RAS2=0x%llx len=%d\n",
> + ras2_ctx->comm_base_addr, len);
> +
> + /*
> + * ras2_ss->latency is just a Nominal value. In reality
> + * the remote processor could be much slower to reply.
> + * So add an arbitrary amount of wait on top of Nominal.
> + */
> + usecs_lat = RAS2_NUM_RETRIES * ras2_ss->latency;
> + ras2_ctx->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
> + ras2_ctx->pcc_mrtt = ras2_ss->min_turnaround_time;
> + ras2_ctx->pcc_mpar = ras2_ss->max_access_rate;
> + ras2_ctx->pcc_comm_addr = acpi_os_ioremap(ras2_ctx->comm_base_addr,
> + len);
> + dev_dbg(ras2_ctx->dev, "pcc_comm_addr=%p\n",
> + ras2_ctx->pcc_comm_addr);
> +
> + /* Set flag so that we dont come here for each CPU. */
> + ras2_ctx->pcc_channel_acquired = true;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ras2_register_pcc_channel);
> +
> +/**
> + * ras2_unregister_pcc_channel() - Unregister PCC channel
> + * @ras2_ctx: pointer to the ras2 context structure
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +int ras2_unregister_pcc_channel(struct ras2_context *ras2_ctx)
> +{
> + if (!ras2_ctx->pcc_chan)
> + return -EINVAL;
> +
> + pcc_mbox_free_channel(ras2_ctx->pcc_chan);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ras2_unregister_pcc_channel);
> +
> +/**
> + * ras2_add_platform_device() - Add a platform device for RAS2
> + * @name: name of the device we're adding
> + * @data: platform specific data for this platform device
> + * @size: size of platform specific data
> + *
> + * Returns: pointer to platform device on success, an error otherwise
> + */
> +struct platform_device *ras2_add_platform_device(char *name, const void *data,
> + size_t size)
> +{
> + int ret;
> + struct platform_device *pdev;
> +
> + pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO);
> + if (!pdev)
> + return NULL;
> +
> + ret = platform_device_add_data(pdev, data, size);
> + if (ret)
> + goto dev_put;
> +
> + ret = platform_device_add(pdev);
> + if (ret)
> + goto dev_put;
> +
> + return pdev;
> +
> +dev_put:
> + platform_device_put(pdev);
> +
> + return ERR_PTR(ret);
> +}
> diff --git a/include/acpi/ras2_acpi.h b/include/acpi/ras2_acpi.h
> new file mode 100644
> index 000000000000..5e9ac788670a
> --- /dev/null
> +++ b/include/acpi/ras2_acpi.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * RAS2 ACPI driver header file
> + *
> + * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises
> + *
> + * Copyright (c) 2024 HiSilicon Limited
> + */
> +
> +#ifndef _RAS2_ACPI_H
> +#define _RAS2_ACPI_H
> +
> +#include <linux/acpi.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/types.h>
> +#include <acpi/pcc.h>
> +
> +#define RAS2_PCC_CMD_COMPLETE 1
> +
> +/* RAS2 specific PCC commands */
> +#define RAS2_PCC_CMD_EXEC 0x01
> +
> +#define RAS2_FAILURE 0
> +#define RAS2_SUCCESS 1
> +
> +/*
> + * Arbitrary Retries for PCC commands because the
> + * remote processor could be much slower to reply.
> + */
> +#define RAS2_NUM_RETRIES 600
> +
> +/*
> + * Data structures for PCC communication and RAS2 table
> + */
> +struct ras2_context {
> + struct device *dev;
> + int id;
> + struct mbox_client mbox_client;
> + struct pcc_mbox_chan *pcc_chan;
> + void __iomem *pcc_comm_addr;
> + u64 comm_base_addr;
> + int pcc_subspace_idx;
> + bool pcc_channel_acquired;
> + ktime_t deadline;
> + unsigned int pcc_mpar;
> + unsigned int pcc_mrtt;
> + /* Lock to provide mutually exclusive access to PCC channel */
> + spinlock_t spinlock;
> + struct device *scrub_dev;
> + const struct ras2_hw_scrub_ops *ops;
> +};
> +
> +struct platform_device *ras2_add_platform_device(char *name, const void *data,
> + size_t size);
> +int ras2_send_pcc_cmd(struct ras2_context *ras2_ctx, u16 cmd);
> +int ras2_register_pcc_channel(struct ras2_context *ras2_ctx);
> +int ras2_unregister_pcc_channel(struct ras2_context *ras2_ctx);
> +#endif /* _RAS2_ACPI_H */
> --
> 2.34.1
>

Next message: Zi Yan: "Re: [PATCH v2] mm/migrate: put dest folio on deferred split list if source was there."
Previous message: Krzysztof Kozlowski: "[PATCH 4/4] ARM: dts: samsung: smdk4412: align keypad node names with dtschema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]