[PATCH v2] i40e: Prevent setting MTU if greater than MFS

[Erwan Velu]

Commit 6871a7de705b6f6a4046f0d19da9bcd689c3bc8e from iPXE project is
setting the MFS to 0x600 = 1536.

At boot time the i40e driver complains about it with
the following message but continues.

	MFS for port 1 has been set below the default: 600

If the MTU size is increased, the driver accept it but large packets will not
be processed by the firmware generating tx_errors. The issue is pretty
silent for users. i.e doing TCP in such context will generates lots of
retransmissions until the proper window size (below 1500) will be used.

To fix this case, it would have been ideal to increase the MFS,
via i40e_aqc_opc_set_mac_config, but I didn't found a reliable way to do it.

At least, this commit prevents setting up an MTU greater than the current MFS.
It will avoid being in the position of having an MTU set to 9000 on the
netdev with a firmware refusing packets larger than 1536.

A typical trace looks like the following :
[  377.548696] i40e 0000:5d:00.0 eno5: Error changing mtu to 9000 which is greater than the current mfs: 1536

Signed-off-by: Erwan Velu <e.velu@xxxxxxxxxx>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 89a3401d20ab..225b2fd0449e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2950,7 +2950,7 @@ static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	int frame_size;
+	int frame_size, mfs, max_mtu;
 
 	frame_size = i40e_max_vsi_frame_size(vsi, vsi->xdp_prog);
 	if (new_mtu > frame_size - I40E_PACKET_HDR_PAD) {
@@ -2959,6 +2959,14 @@ static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
 		return -EINVAL;
 	}
 
+	mfs = pf->hw.phy.link_info.max_frame_size;
+	max_mtu = mfs - I40E_PACKET_HDR_PAD;
+	if (new_mtu > max_mtu) {
+		netdev_err(netdev, "Error changing mtu to %d, Max is %d. MFS is too small.\n",
+			   new_mtu, max_mtu);
+		return -EINVAL;
+	}
+
 	netdev_dbg(netdev, "changing MTU from %d to %d\n",
 		   netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
-- 
2.44.0