Re: [PATCH v6 2/4] ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers

[Frank Li]

On Fri, Mar 08, 2024 at 02:11:34PM -0500, Frank Li wrote:
> On Fri, Mar 08, 2024 at 02:01:29PM -0500, Frank Li wrote:
> > On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote:
> > > On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote:
> > > > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms
> > > > have 1 interrupt.
> > > > 
> > > > Increase max interrupt number to 2 and add restriction for platforms except
> > > > i.MX8QXP and i.MX8QM.
> > > > 
> > > > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > > ---
> > > >  .../devicetree/bindings/sound/fsl,spdif.yaml        | 21 ++++++++++++++++++++-
> > > >  1 file changed, 20 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> > > > index 56f8c0c8afdea..a242f68f99f18 100644
> > > > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> > > > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> > > > @@ -31,7 +31,11 @@ properties:
> > > >      maxItems: 1
> > > >  
> > > >    interrupts:
> > > > -    maxItems: 1
> > > > +    minItems: 1
> > > > +    maxItems: 2
> > > > +    items:
> > > > +      - description: Combined or receive interrupt
> > > > +      - description: Transmit interrupt
> > > 
> > > Test your patches please because this will have warnings. Or, you can 
> > > put in *exactly* what I provided because this is not it.
> > > 
> > > If you continue to just toss crap at us at the rate you are, the DT 
> > > maintainers will either just start ignoring your patches or require some 
> > > trusted review by another NXP colleague first (offhand, not sure who 
> > > that would be which is part of the problem).
> > 
> > Sorry, I run wrong command to check another dtb file. So have not catch
> > this problem.
> 
> Strange when I run second time, spdif warning disappeared.
> 
> make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8  CHECK_DTBS=y freescale/imx8dxl-evk.dtb
>   DTC_CHK arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /: fixedregulator@101: 'anyOf' conditional failed, one must be fixed:
> 	'reg' is a required property
> 	'ranges' is a required property
> 	from schema $id: http://devicetree.org/schemas/root-node.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@34000000: clock-cm40-ipg: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[132000000]], 'clock-output-names': ['cm40_ipg_clk'], 'phandle': [[15]]} should not be valid under {'type': 'object'}
> 	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: intmux@37400000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: 'clocks' is a required property
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: 'clocks' is a required property
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a070000: Unevaluated properties are not allowed ('resets' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: 'clocks' is a required property
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: 'clocks' is a required property
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@5b000000: clock-conn-bch: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[400000000]], 'clock-output-names': ['conn_bch_clk']} should not be valid under {'type': 'object'}
> 	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: $nodename:0: 'dma-apbh@5b810000' does not match '^dma-controller(@.*)?$'
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: 'clock-names', 'interrupt-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
> 

I figured out what's happen. CHECK_DTB will check binding doc except
example part. So I skip run dt_binding_check when I have not touch example
part in dt-binding doc.

The problem is
step 1. run make CHECK_DTB=y freescale/imx8ulp-evk.dtb
        Then I get some sai error, I found use wrong 8ulp-evk.dtb

step 2. run make CHECK_DTBS=y freescale/imx8dxl-evk.dtb
        Then tools not check dt_binding file again even there are warning.

Do you have option let CHECK_DTBS to force check binding doc every time.

Frank

> 
> 
> > 
> > Frank
> > 
> > > 
> > > Rob