[PATCH v2 0/3] rockchip: small DTS fixes for RK3399 Puma

[Quentin Schulz]

There's a pull-up missing on a pin that is used as GPIO input for PCIe
which will make the diode/level-shifter not let voltage pass and thus
not allowing the state of the pin to change.

Also add the missing regulators for the PCIe PHY+connector though this
is purely cosmetic.

There's also a missing PU on the USB ID pin used as a GPIO input, so
let's add it for the same reasons as the one used for PCIe listed above.

Note there's a light dependency on
https://lore.kernel.org/linux-rockchip/43d84aa9-ce0f-406e-82ac-2a691264ee23@xxxxxxxxxxxxxxxxxxxxx/T/#ma0499cbc5e5c20f1a4c6b8452baa2d296abe2d0d
to prevent a git conflict for the maintainer(s).

Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
- added underscore in regulator names to match schematics,
- reworded commit log for PCIE_WAKE# pull-up as suggested off-list by
  Heiko,
- Link to v1: https://lore.kernel.org/r/20240308-puma-diode-pu-v1-0-2b38457bcdc0@xxxxxxxxxxxxxxxxxxxxx

---
Quentin Schulz (3):
      arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
      arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
      arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou

 .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts |  2 ++
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi      | 33 +++++++++++++++++++++-
 2 files changed, 34 insertions(+), 1 deletion(-)
---
base-commit: 370e52abbf8306f09b0022995ad7ccdff3a834bb
change-id: 20240308-puma-diode-pu-1d2f4551be6d

Best regards,
-- 
Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>