[PATCH net-next v9 4/9] dt-bindings: net: convert hisi-femac.txt to YAML

From: Yang Xiwen via B4 Relay
Date: Thu Mar 07 2024 - 06:35:40 EST


From: Yang Xiwen <forbidden405@xxxxxxxxxxx>

Convert the old text binding to new YAML.

While at it, make some changes to the binding:
- The version numbers are not documented publicly. The version also does
not change programming interface. Remove it until it's really needed.
- A few clocks are missing in old binding file. Add them to match the real
hardware.

Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx>
---
.../bindings/net/hisilicon,hisi-femac.yaml | 87 ++++++++++++++++++++++
.../devicetree/bindings/net/hisilicon-femac.txt | 41 ----------
2 files changed, 87 insertions(+), 41 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml
new file mode 100644
index 000000000000..3344d3bfefb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Fast Ethernet MAC controller
+
+maintainers:
+ - Yang Xiwen <forbidden405@xxxxxxxxxxx>
+
+allOf:
+ - $ref: ethernet-controller.yaml
+
+properties:
+ compatible:
+ enum:
+ - hisilicon,hi3516cv300-femac
+
+ reg:
+ items:
+ - description: The first region is the MAC core register base and size.
+ - description: The second region is the global MAC control register.
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: MAC main clock
+ - description: MAC bus interface clock
+ - description: PHY clock
+
+ clock-names:
+ items:
+ - const: mac
+ - const: macif
+ - const: phy
+
+ resets:
+ items:
+ - description: MAC reset signal
+ - description: PHY reset signal
+
+ reset-names:
+ items:
+ - const: mac
+ - const: phy
+
+ hisilicon,phy-reset-delays-us:
+ description: PHY reset timing requirement (in micro seconds).
+ The integrated PHY usually have a special reset timing sequence and must
+ interact with MAC controller to accomplish the entire reset procedure. So
+ these properties belong to MAC controller, not PHY.
+ items:
+ - description: pre-reset delay for PHY
+ - description: reset pulse for PHY
+ - description: post-reset delay for PHY
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - reset-names
+ - phy-mode
+ - phy-handle
+ - hisilicon,phy-reset-delays-us
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@10090000 {
+ compatible = "hisilicon,hi3516cv300-femac";
+ reg = <0x10090000 0x1000>, <0x10091300 0x200>;
+ interrupts = <12>;
+ clocks = <&clk_femac>, <&clk_femacif>, <&clk_fephy>;
+ clock-names = "mac", "macif", "phy";
+ resets = <&crg 0xec 0>, <&crg 0xec 3>;
+ reset-names = "mac", "phy";
+ mac-address = [00 00 00 00 00 00];
+ phy-mode = "mii";
+ phy-handle = <&fephy>;
+ hisilicon,phy-reset-delays-us = <10000 20000 20000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt
deleted file mode 100644
index 5f96976f3cea..000000000000
--- a/Documentation/devicetree/bindings/net/hisilicon-femac.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Hisilicon Fast Ethernet MAC controller
-
-Required properties:
-- compatible: should contain one of the following version strings:
- * "hisilicon,hisi-femac-v1"
- * "hisilicon,hisi-femac-v2"
- and the soc string "hisilicon,hi3516cv300-femac".
-- reg: specifies base physical address(s) and size of the device registers.
- The first region is the MAC core register base and size.
- The second region is the global MAC control register.
-- interrupts: should contain the MAC interrupt.
-- clocks: A phandle to the MAC main clock.
-- resets: should contain the phandle to the MAC reset signal(required) and
- the PHY reset signal(optional).
-- reset-names: should contain the reset signal name "mac"(required)
- and "phy"(optional).
-- phy-mode: see ethernet.txt [1].
-- phy-handle: see ethernet.txt [1].
-- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
- The 1st cell is reset pre-delay in micro seconds.
- The 2nd cell is reset pulse in micro seconds.
- The 3rd cell is reset post-delay in micro seconds.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt[1].
-
-[1] Documentation/devicetree/bindings/net/ethernet.txt
-
-Example:
- hisi_femac: ethernet@10090000 {
- compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2";
- reg = <0x10090000 0x1000>,<0x10091300 0x200>;
- interrupts = <12>;
- clocks = <&crg HI3518EV200_ETH_CLK>;
- resets = <&crg 0xec 0>,<&crg 0xec 3>;
- reset-names = "mac","phy";
- mac-address = [00 00 00 00 00 00];
- phy-mode = "mii";
- phy-handle = <&phy0>;
- hisilicon,phy-reset-delays-us = <10000 20000 20000>;
- };

--
2.43.0