Re: [PATCH v3 1/1] UPSTREAM: drm/bridge: it6505: fix hibernate to resume no display issue

From: Pin-yen Lin
Date: Thu Mar 07 2024 - 02:37:07 EST


Hi Kuro,

Following up my comments from v2 [1]:

On Wed, Mar 6, 2024 at 10:09 AM kuro <kuro.chung@xxxxxxxxxx> wrote:
>
> From: kuro chung <kuro.chung@xxxxxxxxxx>
>
> ITE added a FIFO reset bit for input video. When system power resume,
> the TTL input of it6505 may get some noise before video signal stable
> and the hardware function reset is required.
> But the input FIFO reset will also trigger error interrupts of output module rising.
> Thus, it6505 have to wait a period can clear those expected error interrupts
> caused by manual hardware reset in one interrupt handler calling to avoid interrupt looping.
>
> Signed-off-by: Allen Chen <allen.chen@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

IIUC you need to sign this off with your name as well. See [2] for more details.
> ---
> drivers/gpu/drm/bridge/ite-it6505.c | 54 ++++++++++++++++++++++++-----
> 1 file changed, 45 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index b53da9bb65a16..e592e14a48578 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -1318,6 +1318,8 @@ static void it6505_video_reset(struct it6505 *it6505)
> it6505_set_bits(it6505, REG_DATA_MUTE_CTRL, EN_VID_MUTE, EN_VID_MUTE);
> it6505_set_bits(it6505, REG_INFOFRAME_CTRL, EN_VID_CTRL_PKT, 0x00);
> it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x02);
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x00);
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, RST_501_FIFO);
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, 0x00);
> it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, 0x00);
> @@ -2480,10 +2482,6 @@ static void it6505_irq_video_fifo_error(struct it6505 *it6505)
> struct device *dev = &it6505->client->dev;
>
> DRM_DEV_DEBUG_DRIVER(dev, "video fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> }
>
> static void it6505_irq_io_latch_fifo_overflow(struct it6505 *it6505)
> @@ -2491,10 +2489,6 @@ static void it6505_irq_io_latch_fifo_overflow(struct it6505 *it6505)
> struct device *dev = &it6505->client->dev;
>
> DRM_DEV_DEBUG_DRIVER(dev, "IO latch fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> }

I don't really like functions that only print one line of debug log,
but I'm not sure what other reviewers think about this.
>
> static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
> @@ -2502,6 +2496,46 @@ static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
> return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
> }
>
> +static bool it6505_is_video_error_int(const int *int_status)
> +{
> + if ((it6505_test_bit(BIT_INT_VID_FIFO_ERROR, (unsigned int *)int_status)) || (it6505_test_bit(BIT_INT_IO_FIFO_OVERFLOW, (unsigned int *)int_status)))
> + return 1;
> + return 0;
> +}
> +
> +static void it6505_irq_video_error_handler(struct it6505 *it6505)
> +{
> + struct device *dev = &it6505->client->dev;
> + int int_status[3] = {0};
> + int reg_0d;
> + int i;
> +
> + it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> + flush_work(&it6505->link_works);
> + it6505_stop_hdcp(it6505);
> + it6505_video_reset(it6505);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "Video Error reset wait video...");
> +
> + for (i = 0; i < 10; i++) {
> + usleep_range(10000, 11000);
> + int_status[2] = it6505_read(it6505, INT_STATUS_03);
> + reg_0d = it6505_read(it6505, REG_SYSTEM_STS);
> + it6505_write(it6505, INT_STATUS_03, int_status[2]);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "reg08 = 0x%02x", int_status[2]);
> + DRM_DEV_DEBUG_DRIVER(dev, "reg0D = 0x%02x", reg_0d);
> +
> + if ((reg_0d & VIDEO_STB) && (reg_0d >= 0))
> + break;
> +
> + if (it6505_is_video_error_int(int_status)) {
> + it6505_video_reset(it6505);
> + DRM_DEV_DEBUG_DRIVER(dev, "Video Error reset wait video (%d)", i);
> + }
> + }

Again, I think we need some code comments for this section, and some
of your replies should be included there.

And can you elaborate more about how this speeds up the video
stabilization? What would happen if we only clear the interrupts once
instead of doing a loop?

> +}
> +
> static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> {
> struct it6505 *it6505 = data;
> @@ -2522,7 +2556,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> { BIT_INT_VID_FIFO_ERROR, it6505_irq_video_fifo_error },
> { BIT_INT_IO_FIFO_OVERFLOW, it6505_irq_io_latch_fifo_overflow },
> };
> - int int_status[3], i;
> + int int_status[3], i, reg_0d;
>
> if (it6505->enable_drv_hold || !it6505->powered)
> return IRQ_HANDLED;
> @@ -2550,6 +2584,8 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> if (it6505_test_bit(irq_vec[i].bit, (unsigned int *)int_status))
> irq_vec[i].handler(it6505);
> }
> + if (it6505_is_video_error_int(int_status))
> + it6505_irq_video_error_handler(it6505);
> }
>
> pm_runtime_put_sync(dev);
> --
> 2.25.1
>

[1]: https://lore.kernel.org/all/CAEXTbpc6084rcmhFABw51SibU7FVyTWo=teQsETq5vCujGKWng@xxxxxxxxxxxxxx/
[2]: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin

Regards,
Pin-yen