Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency

[Dmitry Baryshkov]

On Wed, 6 Mar 2024 at 17:40, Chukun Pan <amadeus@xxxxxxxxxx> wrote:
>
> Hi, Dmitry
> > After this patch non-PMIC IPQ6000 boardss are broken until patch3 is
> > applied. Please change the order of these patches.
>
> This is not the case, please see `opp-supported-hw = <0x2>;`.
> Also: https://github.com/torvalds/linux/blob/master/drivers/cpufreq/qcom-cpufreq-nvmem.c#L334
> This 1.5GHz Frequency only takes effect when the fuse value is `2'b1`.
> I have tested this patch on both fused 1.2GHz and 1.5GHz devices.

Then the commit message should be changed, because you are enabling
1.5 GHz only for non-IPQ6000 SoCs. This patch has no effect on
IPQ6000.

--
With best wishes
Dmitry