Re: [PATCH 5/5] media: imx335: Limit analogue gain value

From: Kieran Bingham
Date: Wed Mar 06 2024 - 12:00:37 EST


Quoting Umang Jain (2024-03-06 08:10:38)
> The sensor gain (both analog and digital) are controlled by a
> single gain value where:
> - 0dB to 30dB correspond to analog gain
> - 30.3dB to 72dB correspond to digital gain
> (with 0.3dB step)
>
> Hence, limit the analogue gain value to 100.
> For digital gain, support can be added later if needed.
>
> Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>

I think this makes the behaviour more consistent with expectations from
userspace for the ANALOGUE_GAIN.

Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>


> ---
> drivers/media/i2c/imx335.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index c00e0c2be3f3..701bd5318b45 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -45,7 +45,7 @@
> /* Analog gain control */
> #define IMX335_REG_AGAIN CCI_REG8(0x30e8)
> #define IMX335_AGAIN_MIN 0
> -#define IMX335_AGAIN_MAX 240
> +#define IMX335_AGAIN_MAX 100
> #define IMX335_AGAIN_STEP 1
> #define IMX335_AGAIN_DEFAULT 0
>
> @@ -1169,6 +1169,14 @@ static int imx335_init_controls(struct imx335 *imx335)
> IMX335_EXPOSURE_STEP,
> IMX335_EXPOSURE_DEFAULT);
>
> + /*
> + * The sensor has an analog gain and a digital gain, both controlled
> + * through a single gain value, expressed in 0.3dB increments. Values
> + * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values
> + * up to 72.0dB (240) add further digital gain. Limit the range to
> + * analog gain only, support for digital gain can be added separately
> + * if needed.
> + */
> imx335->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
> &imx335_ctrl_ops,
> V4L2_CID_ANALOGUE_GAIN,
> --
> 2.43.0
>