[PATCH] arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro

[Jose Ignacio Tornos Martinez]

With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.

Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index f9127ddfbb7d..b3ea54b6ba37 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -416,6 +416,8 @@ regulator-state-mem {
 
 			vccio_sd: LDO_REG5 {
 				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 
-- 
2.43.2