Re: [PATCH 1/2] platform/x86: wmi: Support reading/writing 16 bit EC values

[Hans de Goede]

Hi,

On 3/4/24 23:17, Armin Wolf wrote:
> The ACPI EC address space handler currently only supports
> reading/writing 8 bit values. Some firmware implementations however
> want to access for example 16 bit values, which is prefectly legal
> according to the ACPI spec.
> 
> Add support for reading/writing such values.
> 
> Tested on a Dell Inspiron 3505 and a Asus Prime B650-Plus.
> 
> Signed-off-by: Armin Wolf <W_Armin@xxxxxx>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans



> ---
>  drivers/platform/x86/wmi.c | 44 +++++++++++++++++++++++++++++---------
>  1 file changed, 34 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
> index 1920e115da89..900e0e52a5fa 100644
> --- a/drivers/platform/x86/wmi.c
> +++ b/drivers/platform/x86/wmi.c
> @@ -1153,6 +1153,32 @@ static int parse_wdg(struct device *wmi_bus_dev, struct platform_device *pdev)
>  	return 0;
>  }
> 
> +static int ec_read_multiple(u8 address, u8 *buffer, size_t bytes)
> +{
> +	int i, ret;
> +
> +	for (i = 0; i < bytes; i++) {
> +		ret = ec_read(address + i, &buffer[i]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ec_write_multiple(u8 address, u8 *buffer, size_t bytes)
> +{
> +	int i, ret;
> +
> +	for (i = 0; i < bytes; i++) {
> +		ret = ec_write(address + i, buffer[i]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  /*
>   * WMI can have EmbeddedControl access regions. In which case, we just want to
>   * hand these off to the EC driver.
> @@ -1162,27 +1188,25 @@ acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address,
>  			  u32 bits, u64 *value,
>  			  void *handler_context, void *region_context)
>  {
> -	int result = 0;
> -	u8 temp = 0;
> +	int bytes = bits / 8;
> +	int ret;
> 
> -	if ((address > 0xFF) || !value)
> +	if (address > 0xFF || !value)
>  		return AE_BAD_PARAMETER;
> 
> -	if (function != ACPI_READ && function != ACPI_WRITE)
> +	if (bytes > sizeof(*value))
>  		return AE_BAD_PARAMETER;
> 
> -	if (bits != 8)
> +	if (function != ACPI_READ && function != ACPI_WRITE)
>  		return AE_BAD_PARAMETER;
> 
>  	if (function == ACPI_READ) {
> -		result = ec_read(address, &temp);
> -		*value = temp;
> +		ret = ec_read_multiple(address, (u8 *)value, bytes);
>  	} else {
> -		temp = 0xff & *value;
> -		result = ec_write(address, temp);
> +		ret = ec_write_multiple(address, (u8 *)value, bytes);
>  	}
> 
> -	switch (result) {
> +	switch (ret) {
>  	case -EINVAL:
>  		return AE_BAD_PARAMETER;
>  	case -ENODEV:
> --
> 2.39.2
>