Re: [RESEND, PATCH 3/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function

[CK Hu (胡俊光)]

Hi, Jason:

On Mon, 2024-03-04 at 16:04 +0000, Jason-JH Lin (林睿祥) wrote:
> Hi CK,
> 
> Thanks for the reviews.
> 
> On Mon, 2024-03-04 at 03:11 +0000, CK Hu (胡俊光) wrote:
> > Hi, Jason:
> > 
> > On Fri, 2024-03-01 at 22:44 +0800, Jason-JH.Lin wrote:
> > > Add cmdq_pkt_poll_addr function to support CMDQ user making
> > > an instruction for polling a specific address of hardware rigster
> > > to check the value with or without mask.
> > > 
> > > POLL is an old operation in GCE, so it does not support SPR and
> > > CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
> > > to move polling register address to GPR to make an instruction.
> > > This will be done in cmdq_pkt_poll_addr().
> > > 
> > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
> > > ---
> > >  drivers/soc/mediatek/mtk-cmdq-helper.c | 38
> > > ++++++++++++++++++++++++++
> > >  include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
> > >  2 files changed, 54 insertions(+)
> > > 
> > > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > > b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > > index 3a1e47ad8a41..2e9fc9bb1183 100644
> > > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > > @@ -12,6 +12,7 @@
> > >  
> > >  #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
> > >  #define CMDQ_POLL_ENABLE_MASK	BIT(0)
> > > +#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
> > 
> > I think there are multiple GPR and you use #14 to store high addr.
> > I
> > would like you to list all GPR and do not limit the usage of each
> > GPR.
> > The question is, why limit #14 to be high addr? If the GPR is
> > shared
> > by
> > all threads, there should be a mechanism to manage GPR usage for
> > client
> > driver to allocate/free GPR.
> 
> Yes, there are 16 GPR, from GPR_R0 ~ GPR_R15 and they are shared by
> all
> threads, but GPR_R0 and GPR_R1 is used by GCE HW itself.
> 
> I think user may not know which GPR is available, so I think CMDQ
> driver should manage the usage of GPR instead of configure by the
> user.
> 
> Currently, we only use 1 dedicated GPR in poll, so I defined it in
> CMDQ
> driver to make it simpler.

If thread 1 poll addr A first, GPR is set to A. But poll time exceed
GCE_THD_SLOT_CYCLES, change to thread 2 and thread 2 poll addr B, GPR
is set to B. Later switch to thread A and GCE would execute poll
command and GPR is B, so thread 1 would poll addr B, but this is wrong.
How do you solve this problem?

Regards,
CK

> 
> > 
> > >  #define CMDQ_EOC_IRQ_EN		BIT(0)
> > >  #define CMDQ_REG_TYPE		1
> > >  #define CMDQ_JUMP_RELATIVE	1
> > > @@ -406,6 +407,43 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt,
> > > u8
> > > subsys,
> > >  }
> > >  EXPORT_SYMBOL(cmdq_pkt_poll_mask);
> > >  
> > > +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr,
> > > u32
> > > value, u32 mask)
> > > +{
> > > +	struct cmdq_instruction inst = { {0} };
> > > +	int err;
> > > +	u8 use_mask = 0;
> > > +
> > > +	if (mask != U32_MAX) {
> > > +		inst.op = CMDQ_CODE_MASK;
> > > +		inst.mask = ~mask;
> > > +		err = cmdq_pkt_append_command(pkt, inst);
> > > +		if (err != 0)
> > > +			return err;
> > > +		use_mask = CMDQ_POLL_ENABLE_MASK;
> > > +	}
> > > +
> > > +	/*
> > > +	 * POLL is an old operation in GCE and it does not support SPR
> > > and CMDQ_CODE_LOGIC,
> > > +	 * so it can not use cmdq_pkt_assign to keep polling register
> > > address to SPR.
> > > +	 * It needs to use GPR and CMDQ_CODE_MASK to move polling
> > > register address to GPR.
> > > +	 */
> > > +	inst.op = CMDQ_CODE_MASK;
> > > +	inst.dst_t = CMDQ_REG_TYPE;
> > > +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
> > > +	inst.mask = addr;
> > 
> > This is full address, not high address. Why name the GPR to
> > CMDQ_POLL_HIGH_ADDR_GPR?
> > 
> 
> My mistake, I'll remove that 'HIGH' word.
> 
> > The addr is not mask, so I would like inst.value = addr.
> 
> OK, I'll change it.
> 
> Regards,
> Jason-JH.Lin
> 
> > 
> > Regards,
> > CK
> >