Re: [PATCH 2/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_mem_move() function

[Jason-JH Lin (林睿祥)]

Hi Angelo,

Thanks for the reviews.

On Mon, 2024-03-04 at 11:05 +0100, AngeloGioacchino Del Regno wrote:
> Il 01/03/24 12:11, Jason-JH.Lin ha scritto:
> > Add cmdq_pkt_mem_move() function to support CMDQ user making
> > an instruction for moving a value from a source address to a
> > destination address.
> > 
> > Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
> > Change-Id: I0128db6a3412303fc6da61f8a57a0c08e0c0067e
> 
> Drop Change-id please
> 
OK, I'll drop this.

> > ---
> >   drivers/soc/mediatek/mtk-cmdq-helper.c | 26
> > ++++++++++++++++++++++++++
> >   include/linux/soc/mediatek/mtk-cmdq.h  | 10 ++++++++++
> >   2 files changed, 36 insertions(+)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index b0cd071c4719..3a1e47ad8a41 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -299,6 +299,32 @@ int cmdq_pkt_write_s_mask_value(struct
> > cmdq_pkt *pkt, u8 high_addr_reg_idx,
> >   }
> >   EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
> >   
> > +s32 cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr,
> > dma_addr_t dst_addr)
> > +{
> > +	s32 err;
> > +	const u16 tmp_reg_idx = CMDQ_THR_SPR_IDX0;
> > +	const u16 swap_reg_idx = CMDQ_THR_SPR_IDX1;
> 
> s32 err at the end please

OK, I'll move it here and I'll change 's32' to 'int' to align with
other functions.

> > +
> > +	/* read the value of src_addr into swap_reg_idx */
> > +	err = cmdq_pkt_assign(pkt, tmp_reg_idx,
> > CMDQ_ADDR_HIGH(src_addr));
> > +	if (err < 0)
> > +		return err;
> > +	err = cmdq_pkt_read_s(pkt, tmp_reg_idx,
> > CMDQ_ADDR_LOW(src_addr), swap_reg_idx);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	/* write the value of swap_reg_idx into dst_addr */
> > +	err = cmdq_pkt_assign(pkt, tmp_reg_idx,
> > CMDQ_ADDR_HIGH(dst_addr));
> > +	if (err < 0)
> > +		return err;
> > +	err = cmdq_pkt_write_s(pkt, tmp_reg_idx,
> > CMDQ_ADDR_LOW(dst_addr), swap_reg_idx);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	return err;
> 
> In the documentation, you say "0 for success", so...
> 
> return 0; here :-)

OK, I'll change it.

> 
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_mem_move);
> > +
> >   int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
> >   {
> >   	struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> > b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 1dae80185f9f..b6dbe2d8f16a 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -182,6 +182,16 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt
> > *pkt, u8 high_addr_reg_idx,
> >   int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8
> > high_addr_reg_idx,
> >   				u16 addr_low, u32 value, u32 mask);
> >   
> > +/**
> > + * cmdq_pkt_mem_move() - append memory move command to the CMDQ
> > packet
> > + * @pkt:	the CMDQ packet
> > + * @src_addr:	source address
> > + * @dma_addr_t: destination address
> > + *
> 
>   * @dst_addr: destination address
>   *
I'll fix that typo. Thanks!

>   * Appends a CMDQ command to copy the value found in `src_addr` to
> `dst_addr`
>   *
>   * Return ....
> 
and also change the doc format like this.

Regards,
Jason-JH.Lin

> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr,
> > dma_addr_t dst_addr);
> > +
> >   /**
> >    * cmdq_pkt_wfe() - append wait for event command to the CMDQ
> > packet
> >    * @pkt:	the CMDQ packet
> 
>