Re: [PATCH] ARM: dts: imx6ul: Set macaddress location in ocotp

[Shawn Guo]

On Thu, Feb 08, 2024 at 01:19:59PM +0100, Manuel Traut wrote:
> If a bootloader does not configure the MAC address, devices come up with
> a random MAC at the moment.
> 
> ocotp provides registers for storing the mac-address.
> Configure those for i.MX6UL and i.MX6ULL allows net/core to retrieve it from
> there.
> 
> Signed-off-by: Manuel Traut <manuel.traut@xxxxxx>
> ---
>  arch/arm/boot/dts/nxp/imx/imx6ul.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
> index a27a7554c2e7..e5e8bf814f77 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
> @@ -538,6 +538,8 @@ fec2: ethernet@20b4000 {
>  				fsl,num-rx-queues = <1>;
>  				fsl,stop-mode = <&gpr 0x10 4>;
>  				fsl,magic-packet;
> +				nvmem-cells = <&fec2_mac_addr>;
> +				nvmem-cell-names = "mac-address";
>  				status = "disabled";
>  			};
>  
> @@ -897,6 +899,8 @@ fec1: ethernet@2188000 {
>  				fsl,num-rx-queues = <1>;
>  				fsl,stop-mode = <&gpr 0x10 3>;
>  				fsl,magic-packet;
> +				nvmem-cells = <&fec1_mac_addr>;
> +				nvmem-cell-names = "mac-address";
>  				status = "disabled";
>  			};
>  
> @@ -1004,6 +1008,14 @@ tempmon_temp_grade: temp-grade@20 {
>  				cpu_speed_grade: speed-grade@10 {
>  					reg = <0x10 4>;
>  				};

Have a newline between nodes.

> +				fec1_mac_addr: mac-addr@88 {
> +					reg = <0x88 6>;
> +				};
> +
> +				fec2_mac_addr: mac-addr@8e {
> +					reg = <0x8e 6>;
> +				};
> +

Dropped this one.

I fixed them up and applied the patch.

Shawn

>  			};
>  
>  			csi: csi@21c4000 {
> -- 
> 2.43.0
>