Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()

[Andy Shevchenko]

On Thu, Feb 22, 2024 at 11:54:46AM -0800, Florian Fainelli wrote:
> On 2/22/24 09:39, Florian Fainelli wrote:
> > On 2/22/24 08:47, Andy Shevchenko wrote:

..

> > Thanks, on 8250_bcm7271.c with the above hunk applied, I did not spot
> > any differences between the values returned by stty or a cat
> > /sys/class/tty/ttyS0/* before or after, the console remained fully
> > functional. I will see if I can run an additional test where I removed
> > the DT's "clocks" property and confirm that the fall back to
> > "clock-frequency" works.
> 
> Also appears to work properly on a Raspberry Pi 4 with the console using the
> bcm2835-aux driver, will provide Tested-by tags on the next submission,
> thanks!

Thank you for prompt testing on real HW!

-- 
With Best Regards,
Andy Shevchenko