[PATCH v3 1/2] mmc: xenon: fix PHY init clock stability

[Elad Nachman]

From: Elad Nachman <enachman@xxxxxxxxxxx>

Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-xenon-phy.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 8cf3a375de65..c3096230a969 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/ktime.h>
+#include <linux/iopoll.h>
 #include <linux/of_address.h>
 
 #include "sdhci-pltfm.h"
@@ -216,6 +217,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host)
 	return 0;
 }
 
+static int xenon_check_stability_internal_clk(struct sdhci_host *host)
+{
+	u32 reg;
+	int err;
+
+	err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE,
+				1100, 20000, false, host, SDHCI_CLOCK_CONTROL);
+	if (err)
+		dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n");
+
+	return err;
+}
+
 /*
  * eMMC 5.0/5.1 PHY init/re-init.
  * eMMC PHY init should be executed after:
@@ -232,6 +246,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
 	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
 
+	int ret = xenon_check_stability_internal_clk(host);
+
+	if (ret)
+		return ret;
+
 	reg = sdhci_readl(host, phy_regs->timing_adj);
 	reg |= XENON_PHY_INITIALIZAION;
 	sdhci_writel(host, reg, phy_regs->timing_adj);
-- 
2.25.1