Re: [PATCH v3 1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format

[Frank Li]

On Thu, Feb 22, 2024 at 12:30:48PM -0600, Rob Herring wrote:
> On Wed, Feb 14, 2024 at 02:41:44PM -0500, Frank Li wrote:
> > Convert the layerscape-pci PCIe binding document to yaml format.
> > 
> > Additionally, changes for the layerscape-pci endpoint part:
> > - Add interrupt name 'pme' restriction for fsl,ls1028a-pcie-ep,
> > fsl,ls1046a-pcie-ep, and fsl,ls1088a-pcie-ep.
> > - Add register name restrictions: 'reg' and 'addr_space'. 'addr_space' is
> > required by snps,dw-pcie-ep.
> > - Add an example.
> > 
> > Changes for the layerscape-pci root complex part:
> > - Add required property: 'reg-names', "#address-cells", "#size-cells",
> > 'device_type', 'bus-range', 'ranges', "#interrupt-cells",
> > 'interrupt-map-mask' and 'interrupt-map'.
> > - Interrupt-names requirement split to each compatible string.
> > - Add register name restrictions: 'reg' and 'config'. 'config' is required
> > by snps,dw-pcie.
> > 
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > 
> > Notes:
> >     There are log discuss at v1. If I missed something, let me know.
> >     
> >     Change from v2 to v3
> >     - update commit message, show change compare txt file
> >     - add failback compatible fsl,ls-pcie-ep.
> >     - add commit message about 'addr_space' and 'config'.
> >     
> >     Change from v1 to v2
> >     - remove '|-'
> >     - dma-coherent: true
> >     - add interrupts and interrupt-names at before Allof
> >     - remove ref to snps,pcie*.yaml, some reg-names are not aligned with in
> >     drivers
> >     - Add an example for pcie-ep
> > 
> >  .../bindings/pci/fsl,layerscape-pcie-ep.yaml  | 110 +++++++++++
> >  .../bindings/pci/fsl,layerscape-pcie.yaml     | 182 ++++++++++++++++++
> >  .../bindings/pci/layerscape-pci.txt           |  79 --------
> >  3 files changed, 292 insertions(+), 79 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
> >  create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
> > new file mode 100644
> > index 0000000000000..b384a0b2fe22e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale Layerscape PCIe Endpoint(EP) controller
> > +
> > +maintainers:
> > +  - Frank Li <Frank.Li@xxxxxxx>
> > +
> > +description:
> > +  This PCIe EP controller is based on the Synopsys DesignWare PCIe IP.
> 
> Where's the reference to the DWC schema?

reg-names have not alignned with dwc schema yet because this driver
upstream early. ('reg' vs 'dbi')  If Add dwc schema, which will cause many
warning when do dtb check.

I plan update driver and this binding in future to add dwc schema. 

Is it okay? or I add ref dwc schama, and omit dtb_check warning now?

Frank

> 
> > +
> > +  This controller derives its clocks from the Reset Configuration Word (RCW)
> > +  which is used to describe the PLL settings at the time of chip-reset.
> > +
> > +  Also as per the available Reference Manuals, there is no specific 'version'
> > +  register available in the Freescale PCIe controller register set,
> > +  which can allow determining the underlying DesignWare PCIe controller version
> > +  information.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - fsl,ls2088a-pcie-ep
> > +          - fsl,ls1088a-pcie-ep
> > +          - fsl,ls1046a-pcie-ep
> > +          - fsl,ls1028a-pcie-ep
> > +          - fsl,lx2160ar2-pcie-ep
> > +      - const: fsl,ls-pcie-ep
> > +
> > +  reg:
> > +    maxItems: 2
> > +
> > +  reg-names:
> > +    items:
> > +      - const: regs
> > +      - const: addr_space
> > +
> > +  fsl,pcie-scfg:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: A phandle to the SCFG device node. The second entry is the
> > +      physical PCIe controller index starting from '0'. This is used to get
> > +      SCFG PEXN registers.
> > +
> > +  big-endian:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> > +    description: If the PEX_LUT and PF register block is in big-endian, specify
> > +      this property.
> > +
> > +  dma-coherent: true
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    oneOf:
> > +      - anyOf:
> > +          - const: pme
> > +          - const: aer
> > +      - const: intr
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,ls1028a-pcie-ep
> > +            - fsl,ls1046a-pcie-ep
> > +            - fsl,ls1088a-pcie-ep
> > +    then:
> > +      properties:
> > +        interrupt-names:
> > +          items:
> > +            - const: pme
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pcie_ep1: pcie-ep@3400000 {
> > +        compatible = "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep";
> > +        reg = <0x00 0x03400000 0x0 0x00100000
> > +              0x80 0x00000000 0x8 0x00000000>;
> > +        reg-names = "regs", "addr_space";
> > +        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
> > +        interrupt-names = "pme";
> 
> > +        num-ib-windows = <6>;
> > +        num-ob-windows = <8>;
> 
> Not documented and deprecated.
> 
> > +        status = "disabled";
> 
> Examples should be enabled.
> 
> > +      };
> > +    };
> > +...
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
> > new file mode 100644
> > index 0000000000000..988929729580a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
> > @@ -0,0 +1,182 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale Layerscape PCIe Root Complex(RC) controller
> > +
> > +maintainers:
> > +  - Frank Li <Frank.Li@xxxxxxx>
> > +
> > +description:
> > +  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
> > +
> > +  This controller derives its clocks from the Reset Configuration Word (RCW)
> > +  which is used to describe the PLL settings at the time of chip-reset.
> > +
> > +  Also as per the available Reference Manuals, there is no specific 'version'
> > +  register available in the Freescale PCIe controller register set,
> > +  which can allow determining the underlying DesignWare PCIe controller version
> > +  information.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - fsl,ls1021a-pcie
> > +      - fsl,ls2080a-pcie
> > +      - fsl,ls2085a-pcie
> > +      - fsl,ls2088a-pcie
> > +      - fsl,ls1088a-pcie
> > +      - fsl,ls1046a-pcie
> > +      - fsl,ls1043a-pcie
> > +      - fsl,ls1012a-pcie
> > +      - fsl,ls1028a-pcie
> > +      - fsl,lx2160a-pcie
> > +
> > +  reg:
> > +    maxItems: 2
> > +
> > +  reg-names:
> > +    items:
> > +      - const: regs
> > +      - const: config
> > +
> > +  fsl,pcie-scfg:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: A phandle to the SCFG device node. The second entry is the
> > +      physical PCIe controller index starting from '0'. This is used to get
> > +      SCFG PEXN registers.
> > +
> > +  big-endian:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> > +    description: If the PEX_LUT and PF register block is in big-endian, specify
> > +      this property.
> > +
> > +  dma-coherent: true
> > +
> > +  msi-parent: true
> > +
> > +  iommu-map: true
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 3
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - device_type
> > +  - bus-range
> 
> This should never be required unless you have some restriction in the 
> h/w. DWC generally doesn't.
> 
> > +  - ranges
> > +  - interrupts
> > +  - interrupt-names
> > +  - "#interrupt-cells"
> > +  - interrupt-map-mask
> > +  - interrupt-map
> 
> The common PCI and DWC schemas already make most of these required, so 
> you don't need to here.
> 
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-bus.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,lx2160a-pcie
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 2
> > +        interrupt-names:
> > +          items:
> > +            - const: pme
> > +            - const: aer
> > +            - const: intr
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,ls1028a-pcie
> > +            - fsl,ls1046a-pcie
> > +            - fsl,ls1043a-pcie
> > +            - fsl,ls1012a-pcie
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 2
> > +        interrupt-names:
> > +          items:
> > +            - const: pme
> > +            - const: aer
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,ls2080a-pcie
> > +            - fsl,ls2085a-pcie
> > +            - fsl,ls2088a-pcie
> > +            - fsl,ls1021a-pcie
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 1
> > +        interrupt-names:
> > +          items:
> > +            - const: intr
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,ls1088a-pcie
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 1
> > +        interrupt-names:
> > +          items:
> > +            - const: aer
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pcie@3400000 {
> > +        compatible = "fsl,ls1088a-pcie";
> > +        reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
> > +            <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
> > +        reg-names = "regs", "config";
> > +        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
> > +        interrupt-names = "aer";
> > +        #address-cells = <3>;
> > +        #size-cells = <2>;
> > +        dma-coherent;
> > +        device_type = "pci";
> > +        bus-range = <0x0 0xff>;
> > +        ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
> > +                 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +        msi-parent = <&its>;
> > +        #interrupt-cells = <1>;
> > +        interrupt-map-mask = <0 0 0 7>;
> > +        interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
> > +                        <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
> > +                        <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
> > +                        <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
> > +        iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
> > +      };
> > +    };
> > +...