[PATCH v5 05/20] EDAC/synopsys: Fix reading errors count before ECC status

[Serge Semin]

Aside with fixing the errors count CSR usage the commit e2932d1f6f05
("EDAC/synopsys: Read the error count from the correct register") all of
the sudden has also changed the order of the errors status check
procedure. So now the errors handler method first reads the number of CE
and UE and only then makes sure that any of these errors have actually
happened. It doesn't make sense. Fix that by getting back the correct
procedures order: first check the ECC status, then read the number of
errors.

Fixes: e2932d1f6f05 ("EDAC/synopsys: Read the error count from the correct register")
Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
---
 drivers/edac/synopsys_edac.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index bd6e52db68bc..fbaf3d9ad517 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -418,18 +418,18 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 	base = priv->baseaddr;
 	p = &priv->stat;
 
-	regval = readl(base + ECC_ERRCNT_OFST);
-	p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
-	p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
-	if (!p->ce_cnt)
-		goto ue_err;
-
 	regval = readl(base + ECC_STAT_OFST);
 	if (!regval)
 		return 1;
 
 	p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
 
+	regval = readl(base + ECC_ERRCNT_OFST);
+	p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
+	p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
+	if (!p->ce_cnt)
+		goto ue_err;
+
 	regval = readl(base + ECC_CEADDR0_OFST);
 	p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK);
 	regval = readl(base + ECC_CEADDR1_OFST);
-- 
2.43.0