[PATCH v7 05/14] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings

From: Théo Lebrun
Date: Wed Feb 21 2024 - 13:23:37 EST


Add dt-schema type bindings for the Mobileye EyeQ5 pin controller.

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
.../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml | 242 +++++++++++++++++++++
1 file changed, 242 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
new file mode 100644
index 000000000000..5f00604bf48c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 pin controller
+
+description: >
+ The EyeQ5 pin controller handles the two pin banks of the system. It belongs
+ to a system-controller block called OLB.
+
+ Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
+ muxing supports two functions for each pin: first is GPIO, second is
+ pin-dependent.
+
+ Pins and groups are bijective.
+
+maintainers:
+ - Grégory Clement <gregory.clement@xxxxxxxxxxx>
+ - Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
+ - Vladimir Kondratiev <vladimir.kondratiev@xxxxxxxxxxxx>
+
+$ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mobileye,eyeq5-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "-pins?$":
+ type: object
+ description: Pin muxing configuration.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+ properties:
+ pins: true
+ function:
+ enum: [gpio,
+ # Bank A
+ timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+ spi1, refclk0,
+ # Bank B
+ timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength: true
+ required:
+ - pins
+ - function
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ pins:
+ items: # PA0 - PA28, PB0 - PB22
+ pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+ - if:
+ properties:
+ function:
+ const: timer0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA0, PA1]
+ - if:
+ properties:
+ function:
+ const: timer1
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA2, PA3]
+ - if:
+ properties:
+ function:
+ const: timer2
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA4, PA5]
+ - if:
+ properties:
+ function:
+ const: timer5
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA6, PA7, PA8, PA9]
+ - if:
+ properties:
+ function:
+ const: uart0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA10, PA11]
+ - if:
+ properties:
+ function:
+ const: uart1
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA12, PA13]
+ - if:
+ properties:
+ function:
+ const: can0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA14, PA15]
+ - if:
+ properties:
+ function:
+ const: can1
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA16, PA17]
+ - if:
+ properties:
+ function:
+ const: spi0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA18, PA19, PA20, PA21, PA22]
+ - if:
+ properties:
+ function:
+ const: spi1
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA23, PA24, PA25, PA26, PA27]
+ - if:
+ properties:
+ function:
+ const: refclk0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PA28]
+ - if:
+ properties:
+ function:
+ const: timer3
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB0, PB1]
+ - if:
+ properties:
+ function:
+ const: timer4
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB2, PB3]
+ - if:
+ properties:
+ function:
+ const: timer6
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB4, PB5, PB6, PB7]
+ - if:
+ properties:
+ function:
+ const: uart2
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB8, PB9]
+ - if:
+ properties:
+ function:
+ const: can2
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB10, PB11]
+ - if:
+ properties:
+ function:
+ const: spi2
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB12, PB13, PB14, PB15, PB16]
+ - if:
+ properties:
+ function:
+ const: spi3
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB17, PB18, PB19, PB20, PB21]
+ - if:
+ properties:
+ function:
+ const: mclk0
+ then:
+ properties:
+ pins:
+ items:
+ enum: [PB22]
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false

--
2.43.2