Re: [PATCH 7/9] media: dt-bindings: Add Chameleon v3 framebuffer

[Paweł Anikiel]

On Thu, Feb 15, 2024 at 6:29 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Mon, Feb 12, 2024 at 01:13:21PM +0000, Paweł Anikiel wrote:
> > The Chameleon v3 uses the framebuffer IP core to take the video signal
> > from different sources and directly write frames into memory.
> >
> > Signed-off-by: Paweł Anikiel <panikiel@xxxxxxxxxx>
> > ---
> >  .../bindings/media/google,chv3-fb.yaml        | 77 +++++++++++++++++++
> >  1 file changed, 77 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/google,chv3-fb.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/google,chv3-fb.yaml b/Documentation/devicetree/bindings/media/google,chv3-fb.yaml
> > new file mode 100644
> > index 000000000000..ba6643cc7232
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/google,chv3-fb.yaml
> > @@ -0,0 +1,77 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/google,chv3-fb.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Google Chameleon v3 video framebuffer
> > +
> > +maintainers:
> > +  - Paweł Anikiel <panikiel@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    const: google,chv3-fb
> > +
> > +  reg:
> > +    items:
> > +      - description: core registers
> > +      - description: irq registers
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  google,legacy-format:
> > +    type: boolean
> > +    description: The incoming video stream is in 32-bit padded mode.
> > +
> > +  google,no-endpoint:
> > +    type: boolean
> > +    description:
> > +      The framebuffer isn't connected to a controllable endpoint.
> > +      The video interface still works, but EDID control is unavailable
> > +      and DV timing information only reports the active video width/height.
>
> Why does this need a dedicated property? Is it not sufficient to check
> that there are no endpoints in the devicetree?

Yes, I think it is sufficient. I removed the property and added a
check in the driver in v2.