[PATCH v2 0/4] arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters

[Abel Vesa]

The X1E80100 platform comes with a v7 SPMI arbiter, which means it
implements two separate buses. The boards using this platform come with
3 instances of SMB2360 PMIC which implement a eUSB2 repeater.

This patchset relies on the support added by this patchset:
https://lore.kernel.org/all/20240221-spmi-multi-master-support-v5-0-3255ca413a0b@xxxxxxxxxx/

To: Andy Gross <agross@xxxxxxxxxx>
To: Bjorn Andersson <andersson@xxxxxxxxxx>
To: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
To: Rob Herring <robh+dt@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
To: Rob Herring <robh@xxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>

Changes in v2:
- Reworked the whole SPMI DT node layout
- Added the SPMI DT node
- Added patches for each board (QCP and CRD) that adds the repeater
  nodes
- Link to v1: https://lore.kernel.org/r/20231212-x1e80100-dts-smb2360-v1-1-c28bb4d7105e@xxxxxxxxxx

---
Abel Vesa (4):
      arm64: dts: qcom: x1e80100: Add SPMI support
      arm64: dts: qcom: Add SMB2360 pmic dtsi
      arm64: dts: qcom: x1e80100-crd: Add repeater nodes
      arm64: dts: qcom: x1e80100-qcp: Add repeater nodes

 arch/arm64/boot/dts/qcom/smb2360.dtsi     | 51 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 22 +++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 22 +++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 42 +++++++++++++++++++++++++
 4 files changed, 137 insertions(+)
---
base-commit: 4893c639cc3659cefaa675bf1e59f4e7571afb5c
change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>