Re: [PATCH v5 1/4] dt-bindings: spmi: Add PMIC ARB v7 schema

[Dmitry Baryshkov]

On Wed, 21 Feb 2024 at 14:52, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:
>
> Add dedicated schema for PMIC ARB v7 as it allows multiple
> buses by declaring them as child nodes. These child nodes
> will follow the generic spmi bus bindings.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  .../bindings/spmi/qcom,spmi-pmic-arb-v7.yaml       | 119 +++++++++++++++++++++
>  1 file changed, 119 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml
> new file mode 100644
> index 000000000000..8a93d2145aa5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml
> @@ -0,0 +1,119 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb-v7.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Controller v7 (PMIC Arbiter)
> +
> +maintainers:
> +  - Stephen Boyd <sboyd@xxxxxxxxxx>
> +
> +description: |
> +  The SPMI PMIC Arbiter v7 is found on Snapdragon chipsets. It is an SPMI
> +  controller with wrapping arbitration logic to allow for multiple on-chip
> +  devices to control up to 2 SPMI separate buses.
> +
> +  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
> +  to slave devices.
> +
> +properties:
> +  compatible:
> +    const: qcom,spmi-pmic-arb-v7
> +
> +  reg:
> +    items:
> +      - description: core registers
> +      - description: tx-channel per virtual slave regosters
> +      - description: rx-channel (called observer) per virtual slave registers
> +
> +  reg-names:
> +    items:
> +      - const: core
> +      - const: chnls
> +      - const: obsrvr
> +
> +  ranges: true
> +
> +  '#address-cells':
> +    const: 2
> +
> +  '#size-cells':
> +    const: 2
> +
> +  qcom,ee:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 5
> +    description: >
> +      indicates the active Execution Environment identifier
> +
> +  qcom,channel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 5
> +    description: >
> +      which of the PMIC Arb provided channels to use for accesses
> +
> +patternProperties:
> +  "spmi@[0-1]$":
> +    type: object
> +    $ref: /schemas/spmi/spmi.yaml
> +
> +required:
> +  - compatible
> +  - reg-names
> +  - qcom,ee
> +  - qcom,channel
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    spmi: arbiter@c400000 {
> +      compatible = "qcom,spmi-pmic-arb-v7";
> +      reg = <0x0c400000 0x3000>,
> +            <0x0c500000 0x4000000>,
> +            <0x0c440000 0x80000>;
> +      reg-names = "core", "chnls", "obsrvr";
> +
> +      qcom,ee = <0>;
> +      qcom,channel = <0>;
> +
> +      #address-cells = <2>;
> +      #size-cells = <2>;

Shouldn't there be an empty 'ranges;' property?

> +
> +      spmi_bus0: spmi@0 {
> +        reg = <0 0x0c42d000 0 0x4000>,
> +              <0 0x0c4c0000 0 0x10000>;

Shouldn't the node address  (@0, @1) match the first address from reg property?

> +        reg-names = "cnfg", "intr";
> +
> +        interrupt-names = "periph_irq";
> +        interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <4>;
> +
> +        qcom,bus-id = <0>;

I thought the goal was to drop qcom,bus-id ?

> +
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +      };
> +
> +      spmi_bus1: spmi@1 {
> +        reg = <0 0x0c432000 0 0x4000>,
> +              <0 0x0c4d0000 0 0x10000>;
> +        reg-names = "cnfg", "intr";
> +
> +        interrupt-names = "periph_irq";
> +        interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <4>;
> +
> +        qcom,bus-id = <1>;
> +
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +      };
> +    };
>
> --
> 2.34.1
>


-- 
With best wishes
Dmitry