Re: [PATCH 06/21] arm64: dts: qcom: sm8550: Add PCIe bridge node

[neil . armstrong]

On 21/02/2024 04:41, Manivannan Sadhasivam wrote:
> On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
> for each controller instance. Hence, add a node to represent the bridge.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index ee1ba5a8c8fc..3ee11311885f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1754,6 +1754,16 @@ pcie0: pcie@1c00000 {
>   			phy-names = "pciephy";
>   
>   			status = "disabled";
> +
> +			pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				bus-range = <0x01 0xff>;
> +
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +			};
>   		};
>   
>   		pcie0_phy: phy@1c06000 {
> @@ -1851,6 +1861,16 @@ pcie1: pcie@1c08000 {
>   			phy-names = "pciephy";
>   
>   			status = "disabled";
> +
> +			pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				bus-range = <0x01 0xff>;
> +
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +			};
>   		};
>   
>   		pcie1_phy: phy@1c0e000 {

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>