[RESEND PATCH v6 v6 1/2] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line

[Krzysztof Kozlowski]

On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers
share SD_N GPIOs between two speakers, thus a coordinated assertion is
needed.  Linux supports handling shared GPIO lines through "reset-gpios"
property, thus allow specifying either powerdown or reset GPIOs (these
are the same).

Cc: Bartosz Golaszewski <brgl@xxxxxxxx>
Cc: Sean Anderson <sean.anderson@xxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Resending because reset part of the patchset was applied, so this can go
independently via ASoC.
https://lore.kernel.org/all/38fda6619769da7240517982adfe734cb653ff5e.camel@xxxxxxxxxxxxxx/

Changes in v6
=============
1. Add Rb/Ack tags.

For full changelog, see:
https://lore.kernel.org/all/20240129115216.96479-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 .../devicetree/bindings/sound/qcom,wsa8840.yaml       | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
index d717017b0fdb..22798d22d981 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -28,6 +28,10 @@ properties:
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 0
 
@@ -37,11 +41,16 @@ properties:
 required:
   - compatible
   - reg
-  - powerdown-gpios
   - '#sound-dai-cells'
   - vdd-1p8-supply
   - vdd-io-supply
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1