Re: [PATCH v13 10/13] irqchip: Add RISC-V advanced PLIC driver for direct-mode

[Anup Patel]

On Tue, Feb 20, 2024 at 7:10 PM Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote:
>
> On Tue, Feb 20 2024 at 11:37, Anup Patel wrote:
> > +/*
> > + * To handle an APLIC direct interrupts, we just read the CLAIMI register
> > + * which will return highest priority pending interrupt and clear the
> > + * pending bit of the interrupt. This process is repeated until CLAIMI
> > + * register return zero value.
> > + */
> > +static void aplic_direct_handle_irq(struct irq_desc *desc)
> > +{
> > +     struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
> > +     struct irq_domain *irqdomain = idc->direct->irqdomain;
> > +     struct irq_chip *chip = irq_desc_get_chip(desc);
> > +     irq_hw_number_t hw_irq;
> > +     int irq;
> > +
> > +     chained_irq_enter(chip, desc);
> > +
> > +     while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
> > +             hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
> > +             irq = irq_find_mapping(irqdomain, hw_irq);
> > +
> > +             if (unlikely(irq <= 0))
> > +                     dev_warn_ratelimited(idc->direct->priv.dev,
> > +                                          "hw_irq %lu mapping not found\n", hw_irq);
>
> Lacks brackets. See Documentation....

Okay, I will update.

>
> > +             else
> > +                     generic_handle_irq(irq);
> > +     }
> > +
> > +static int aplic_direct_starting_cpu(unsigned int cpu)
> > +{
> > +     if (aplic_direct_parent_irq)
> > +             enable_percpu_irq(aplic_direct_parent_irq,
> > +                               irq_get_trigger_type(aplic_direct_parent_irq));
>
> Ditto.

Okay, I will update.

>
> > +     return 0;
> > +}
>
> > +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode)
> > +{
> > +     u32 val;
> > +#ifdef CONFIG_RISCV_M_MODE
> > +     u32 valH;
>
> No camel case please.

Okay.

>
> > +
> > +     if (msi_mode) {
> > +             val = lower_32_bits(priv->msicfg.base_ppn);
> > +             valH = FIELD_PREP(APLIC_xMSICFGADDRH_BAPPN, upper_32_bits(priv->msicfg.base_ppn));
> > +             valH |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXW, priv->msicfg.lhxw);
> > +             valH |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXW, priv->msicfg.hhxw);
> > +             valH |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXS, priv->msicfg.lhxs);
> > +             valH |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXS, priv->msicfg.hhxs);
> > +             writel(val, priv->regs + APLIC_xMSICFGADDR);
> > +             writel(valH, priv->regs + APLIC_xMSICFGADDRH);
> > +     }
>
> Thanks,
>
>         tglx

Regards,
Anup