[PATCH] phy: qcom: m31: match requested regulator name with dt schema

[Gabor Juhos]

According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:

  qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
  qcom-m31usb-phy 5b000.phy: Registered M31 USB phy

This means that the regulator specified in the device tree never
gets enabled.

Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.

Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-m31.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
index c2590579190a..9d84858ba1db 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31.c
@@ -297,7 +297,7 @@ static int m31usb_phy_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(qphy->phy),
 				     "failed to create phy\n");
 
-	qphy->vreg = devm_regulator_get(dev, "vdda-phy");
+	qphy->vreg = devm_regulator_get(dev, "vdd");
 	if (IS_ERR(qphy->vreg))
 		return dev_err_probe(dev, PTR_ERR(qphy->phy),
 				     "failed to get vreg\n");

---
base-commit: b401b621758e46812da61fa58a67c3fd8d91de0d
change-id: 20240220-phy-qcom-m31-regulator-fix-97555a4650b1

Best regards,
-- 
Gabor Juhos <j4g8y7@xxxxxxxxx>