Re: [PATCH net-next v4 2/9] net: usb: ax88179_178a: Use linkmode helpers for EEE

[Andrew Lunn]

On Tue, Feb 20, 2024 at 12:39:24PM +0000, Simon Horman wrote:
> On Sun, Feb 18, 2024 at 11:06:59AM -0600, Andrew Lunn wrote:
> > Make use of the existing linkmode helpers for converting PHY EEE
> > register values into links modes, now that ethtool_keee uses link
> > modes, rather than u32 values.
> > 
> > Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
> > ---
> >  drivers/net/usb/ax88179_178a.c | 9 ++++-----
> >  1 file changed, 4 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> > index d6168eaa286f..d4bf9865d87b 100644
> > --- a/drivers/net/usb/ax88179_178a.c
> > +++ b/drivers/net/usb/ax88179_178a.c
> > @@ -676,21 +676,21 @@ ax88179_ethtool_get_eee(struct usbnet *dev, struct ethtool_keee *data)
> >  					    MDIO_MMD_PCS);
> >  	if (val < 0)
> >  		return val;
> > -	data->supported_u32 = mmd_eee_cap_to_ethtool_sup_t(val);
> > +	mii_eee_cap1_mod_linkmode_t(data->supported, val);
> >  
> >  	/* Get advertisement EEE */
> >  	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_ADV,
> >  					    MDIO_MMD_AN);
> >  	if (val < 0)
> >  		return val;
> > -	data->advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(val);
> > +	mii_eee_cap1_mod_linkmode_t(data->advertised, val);
> >  
> >  	/* Get LP advertisement EEE */
> >  	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_LPABLE,
> >  					    MDIO_MMD_AN);
> >  	if (val < 0)
> >  		return val;
> > -	data->lp_advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(val);
> > +	mii_eee_cap1_mod_linkmode_t(data->lp_advertised, val);
> >  
> >  	return 0;
> >  }
> > @@ -698,7 +698,7 @@ ax88179_ethtool_get_eee(struct usbnet *dev, struct ethtool_keee *data)
> >  static int
> >  ax88179_ethtool_set_eee(struct usbnet *dev, struct ethtool_keee *data)
> >  {
> > -	u16 tmp16 = ethtool_adv_to_mmd_eee_adv_t(data->advertised_u32);
> > +	u16 tmp16 = linkmode_to_mii_eee_cap1_t(data->advertised);
> >  
> >  	return ax88179_phy_write_mmd_indirect(dev, MDIO_AN_EEE_ADV,
> >  					      MDIO_MMD_AN, tmp16);
> > @@ -1663,7 +1663,6 @@ static int ax88179_reset(struct usbnet *dev)
> >  	ax88179_disable_eee(dev);
> >  
> >  	ax88179_ethtool_get_eee(dev, &eee_data);
> > -	eee_data.advertised_u32 = 0;
> 
> Hi Andrew,
> 
> could you clarify why advertised no longer needs to be cleared?

Ah, that is me being too delete happy. When the ethtool core calls
into the driver for eee_get(), it first zeros the structure passed
in. Some drivers than again zeroed members, so i deleted them.

However, this is not a eee_get() call, eee_data is actually a stack
variable. ax88179_ethtool_get_eee() has set it, so it is at least not
random junk. But the intention here is to not advertise any EEE link
modes until the user calls set_eee(). So this zero'ing is needed.

Good catch, thanks.

    Andrew

---
pw-bot: cr