Re: [PATCH 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand

[Md Sadre Alam]

On 2/15/2024 7:54 PM, Conor Dooley wrote:
> On Thu, Feb 15, 2024 at 07:18:52PM +0530, Md Sadre Alam wrote:
> > Add device-tree binding documentation for QCOM QPIC-SNAND-NAND Flash
> > Interface.
> >
> > Co-developed-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> > Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> > ---
> >   .../bindings/spi/qcom,spi-qpic-snand.yaml     | 82 +++++++++++++++++++
> >   1 file changed, 82 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
> > new file mode 100644
> > index 000000000000..fa7484ce1319
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
> > @@ -0,0 +1,82 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/spi/qcom,spi-qpic-snand.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm QPIC NAND controller
> > +
> > +maintainers:
> > +  - Md sadre Alam <quic_mdalam@xxxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,ipq9574-snand
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 2
> > +    maxItems: 3
> > +
> > +  clock-names:
> > +    minItems: 2
> > +    maxItems: 3
> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-controller.yaml#
> > +  - if:
>
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - qcom,ipq9574-snand
> > +
> > +    then:
> > +      properties:
> > +        dmas:
> > +          items:
> > +            - description: tx DMA channel
> > +            - description: rx DMA channel
> > +            - description: cmd DMA channel
> > +
> > +        dma-names:
> > +          items:
> > +            - const: tx
> > +            - const: rx
> > +            - const: cmd
>
> None of this complexity here is needed, you have only one device in this
> binding and therefore can define these properties at the top level.

 Thanks for reviewing, Will fix this in next patch.
> Cheers,
> Conor.
>
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> > +    qpic_nand: spi@79b0000 {
> > +        compatible = "qcom,ipq9574-snand";
> > +        reg = <0x1ac00000 0x800>;
> > +
> > +        clocks = <&gcc GCC_QPIC_CLK>,
> > +                 <&gcc GCC_QPIC_AHB_CLK>,
> > +                 <&gcc GCC_QPIC_IO_MACRO_CLK>;
> > +        clock-names = "core", "aon", "iom";
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        flash@0 {
> > +            compatible = "spi-nand";
> > +            reg = <0>;
> > +            #address-cells = <1>;
> > +            #size-cells = <1>;
> > +            nand-ecc-engine = <&qpic_nand>;
> > +            nand-ecc-strength = <4>;
> > +            nand-ecc-step-size = <512>;
> > +            };
> > +        };
> > --
> > 2.34.1