[PATCH 4/5] regulator: max8997: Convert to GPIO descriptors

[Linus Walleij]

This rewrites the max8997 regulator driver to fetch the dvs
regulators as descriptors. This will likely mostly come from
the device tree since there are no in-tree users of the platform
data, but supplying GPIO descriptor tables from board files is
also possible if needed.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 drivers/regulator/max8997-regulator.c | 85 +++++++++++------------------------
 include/linux/mfd/max8997.h           |  1 -
 2 files changed, 25 insertions(+), 61 deletions(-)

diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index 0b38eaa73597..5f201ee9a5b8 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -9,8 +9,7 @@
 
 #include <linux/bug.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -32,7 +31,7 @@ struct max8997_data {
 	u8 buck1_vol[8];
 	u8 buck2_vol[8];
 	u8 buck5_vol[8];
-	int buck125_gpios[3];
+	struct gpio_desc *buck125_gpiods[3];
 	int buck125_gpioindex;
 	bool ignore_gpiodvs_side_effect;
 
@@ -52,9 +51,9 @@ static inline void max8997_set_gpio(struct max8997_data *max8997)
 	int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
 	int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
 
-	gpio_set_value(max8997->buck125_gpios[0], set1);
-	gpio_set_value(max8997->buck125_gpios[1], set2);
-	gpio_set_value(max8997->buck125_gpios[2], set3);
+	gpiod_set_value(max8997->buck125_gpiods[0], set1);
+	gpiod_set_value(max8997->buck125_gpiods[1], set2);
+	gpiod_set_value(max8997->buck125_gpiods[2], set3);
 }
 
 struct voltage_map_desc {
@@ -873,31 +872,13 @@ static struct regulator_desc regulators[] = {
 };
 
 #ifdef CONFIG_OF
-static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev,
-			struct max8997_platform_data *pdata,
-			struct device_node *pmic_np)
-{
-	int i, gpio;
-
-	for (i = 0; i < 3; i++) {
-		gpio = of_get_named_gpio(pmic_np,
-					"max8997,pmic-buck125-dvs-gpios", i);
-		if (!gpio_is_valid(gpio)) {
-			dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio);
-			return -EINVAL;
-		}
-		pdata->buck125_gpios[i] = gpio;
-	}
-	return 0;
-}
-
 static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 					struct max8997_platform_data *pdata)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *pmic_np, *regulators_np, *reg_np;
 	struct max8997_regulator_data *rdata;
-	unsigned int i, dvs_voltage_nr = 1, ret;
+	unsigned int i, dvs_voltage_nr = 1;
 
 	pmic_np = iodev->dev->of_node;
 	if (!pmic_np) {
@@ -949,10 +930,6 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
 						pdata->buck5_gpiodvs) {
-		ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np);
-		if (ret)
-			return -EINVAL;
-
 		if (of_property_read_u32(pmic_np,
 				"max8997,pmic-buck125-default-dvs-idx",
 				&pdata->buck125_default_idx)) {
@@ -1039,7 +1016,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
 	max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
 	max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
-	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
 	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
 
 	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
@@ -1110,38 +1086,27 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	 */
 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
 			pdata->buck5_gpiodvs) {
+		const char *gpio_names[3] = {"MAX8997 SET1", "MAX8997 SET2", "MAX8997 SET3"};
 
-		if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
-				!gpio_is_valid(pdata->buck125_gpios[1]) ||
-				!gpio_is_valid(pdata->buck125_gpios[2])) {
-			dev_err(&pdev->dev, "GPIO NOT VALID\n");
-			return -EINVAL;
-		}
+		for (i = 0; i < 3; i++) {
+			enum gpiod_flags flags;
 
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
-					"MAX8997 SET1");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
-					"MAX8997 SET2");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
-				"MAX8997 SET3");
-		if (ret)
-			return ret;
-
-		gpio_direction_output(pdata->buck125_gpios[0],
-				(max8997->buck125_gpioindex >> 2)
-				& 0x1); /* SET1 */
-		gpio_direction_output(pdata->buck125_gpios[1],
-				(max8997->buck125_gpioindex >> 1)
-				& 0x1); /* SET2 */
-		gpio_direction_output(pdata->buck125_gpios[2],
-				(max8997->buck125_gpioindex >> 0)
-				& 0x1); /* SET3 */
+			if (max8997->buck125_gpioindex & BIT(2 - i))
+				flags = GPIOD_OUT_HIGH;
+			else
+				flags = GPIOD_OUT_LOW;
+
+			max8997->buck125_gpiods[i] = devm_gpiod_get_index(iodev->dev,
+									  "max8997,pmic-buck125-dvs",
+									  i,
+									  flags);
+			if (IS_ERR(max8997->buck125_gpiods[i])) {
+				ret = PTR_ERR(max8997->buck125_gpiods[i]);
+				return dev_err_probe(iodev->dev, ret, "cant get GPIO %d (%d)\n",
+						     i, ret);
+			}
+			gpiod_set_consumer_name(max8997->buck125_gpiods[i], gpio_names[i]);
+		}
 	}
 
 	/* DVS-GPIO disabled */
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 6193905abbb5..5c2cc1103437 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -178,7 +178,6 @@ struct max8997_platform_data {
 	 *
 	 */
 	bool ignore_gpiodvs_side_effect;
-	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
 	int buck125_default_idx; /* Default value of SET1, 2, 3 */
 	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
 	bool buck1_gpiodvs;

-- 
2.34.1