[PATCH v2 0/4] arm64: dts: ti: Enable camera for SK-AM62P

[Jai Luthra]

This series enables support for camera sensors using CSI-RX ports on
AM62P family of SoCs.

Particularly, it enables OV5640 and IMX219 sensors via the 22-pin FFC
CSI-RX connector on SK-AM62P [1] using the existing common overlays for
SK-AM62* family of boards.

Capture test:
https://gist.github.com/jailuthra/11f3383ccc0902b9db90d806222597a3

[1]: https://www.ti.com/tool/SK-AM62P-LP

Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
---
Changes in v2:
- Rebase on top of ti-k3-dts-next
- Fix commit description of PATCH 3/4 to specify we are keeping the nodes
  disabled
- Link to v1: https://lore.kernel.org/r/20240201-am62p_csi-v1-0-c83bb9eaeb49@xxxxxx

Range-diff from v1:

1:  646c0b26cee4 ! 1:  61c395edcfd3 arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
    @@ Commit message
         to enable programming the interrupts correctly.

         Fixes: 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of SoCs")
    +    Reviewed-by: Vaishnav Achath <vaishnav.a@xxxxxx>
         Signed-off-by: Jai Luthra <j-luthra@xxxxxx>

      ## arch/arm64/boot/dts/ti/k3-am62p.dtsi ##
2:  5d6c41db44e3 ! 2:  2720ce668bf9 arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
    @@ Commit message
         On AM62P, CSI-RX uses a dedicated BCDMA instance (DMASS1) for
         transferring captured camera frames to DDR, so enable it.

    +    Reviewed-by: Vaishnav Achath <vaishnav.a@xxxxxx>
         Signed-off-by: Jai Luthra <j-luthra@xxxxxx>

      ## arch/arm64/boot/dts/ti/k3-am62p-main.dtsi ##
3:  2896237c1ad1 ! 3:  9853acf0bc6f arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
    @@ Commit message

         AM62P supports image capture via the MIPI CSI-2 protocol, it uses three
         IPs to achieve this: Cadence DPHY, Cadence CSI-RX, and TI's pixelgrabber
    -    wrapper on top. Enable all of these IPs in the devicetree.
    +    wrapper on top. Add nodes for these IPs in the devicetree, and keep them
    +    disabled here, so these may be enabled by the sensor overlays.

    +    Reviewed-by: Vaishnav Achath <vaishnav.a@xxxxxx>
         Signed-off-by: Jai Luthra <j-luthra@xxxxxx>

      ## arch/arm64/boot/dts/ti/k3-am62p-main.dtsi ##
4:  7a82f73e345d < -:  ------------ arm64: dts: ti: Enable overlays for SK-AM62P
-:  ------------ > 4:  1a5e859dec12 arm64: dts: ti: Enable overlays for SK-AM62P

---
Jai Luthra (4):
      arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
      arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
      arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
      arm64: dts: ti: Enable overlays for SK-AM62P

 arch/arm64/boot/dts/ti/Makefile           | 10 ++++
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 98 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p.dtsi      |  2 +-
 3 files changed, 109 insertions(+), 1 deletion(-)
---
base-commit: 0f9eb43f009091501dd0c68232aa6530ba0e0185
change-id: 20240201-am62p_csi-b69d172406ca

Best regards,
-- 
Jai Luthra <j-luthra@xxxxxx>