Re: [PATCH net-next v3 14/17] dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller

[Oleksij Rempel]

On Mon, Feb 19, 2024 at 03:31:06PM +0100, Köry Maincent wrote:
> On Fri, 16 Feb 2024 08:47:14 +0100
> Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> wrote:
> > >
> > > So, either somebody needs to understand 1000BaseT and can say the
> > > proposed binding works, or we explicitly document the binding is
> > > limited to 10BaseT and 100BaseT.  
> > 
> > I asked the internet and found the answer: Some PSE/PD implementations
> > are not compatible with 1000BaseT.
> > 
> > See Figure 33–4—10BASE-T/100BASE-TX Endpoint PSE location overview.
> > Alternative B show a variant where power is injected directly to pairs
> > without using magnetics as it is done for Alternative A (phantom
> > delivery - over magnetics).
> > 
> > So, we have following variants of 2 pairs PoE:
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | Variant | Alternative   | Polarity          | Power Feeding Type  |
> > Compatibility with | |         | (a/b)         | (Direct/Reverse)  |
> > (Direct/Phantom)    | 1000BaseT          |
> > +=========+===============+===================+=====================+====================+
> > | 1       | a             | Direct            | Phantom             | Yes
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | 2       | a             | Reverse           | Phantom             | Yes
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | 3       | b             | Direct            | Phantom             | Yes
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | 4       | b             | Reverse           | Phantom             | Yes
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | 5       | b             | Direct            | Direct              | No
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> > | 6       | b             | Reverse           | Direct              | No
> >            |
> > +---------+---------------+-------------------+---------------------+--------------------+
> 
> Maybe we could remove the polarity column on this table as it does not bring
> more information. It is also already explained on the PI pinout alternatives
> table.

Ack. I'm still not sure if "Phantom" is correct description.

> 
> Also we should document that a 4pairs PSE supporting only 10/100BaseT (which
> mean no magnetics on pinout AlternativeB) may not be compatible with a 4pairs
> 1GBaseT PD.

Ack. s/may not/is not/ :) and 4pairs PSE is not always compatible with
PoE4 as well. I assume this  kind of knowledge we will get from PSE
driver.

Regards,
Oleksij

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |