Re: [PATCH 0/5] Add QPIC SPI NAND driver

From: Manivannan Sadhasivam
Date: Mon Feb 19 2024 - 08:05:34 EST


On Thu, Feb 15, 2024 at 07:18:51PM +0530, Md Sadre Alam wrote:
> This series of patches will add initial supports
> for QPIC SPI NAND driver.
>
> Currently this driver support following commands
>
> -- RESET
> -- READ ID
> -- BLOCK ERASE
> -- PAGE READ
> -- PAGE WRITE
> -- GET FEATURE
> -- SET FEATURE
> -- BAD BLOCK CHECK
>
> This driver has been tested with dd command with read/write page
> with multiple file size 1MiB, 10MiB,40MiB etc.
> Also tested with "mtd" command like mtd erase, mtd write, mtd verify etc.
>

This is not the first version isn't it? Where is the changelog describing what
has changed since then?

- Mani

> Need help to test these all patches on SDX65 and SDX75 platform.
>
> Md Sadre Alam (5):
> spi: dt-bindings: add binding doc for spi-qpic-snand
> drivers: mtd: nand: Add qpic_common API file
> spi: spi-qpic: Add qpic spi nand driver support
> arm64: dts: qcom: ipq9574: Add SPI nand support
> arm64: dts: qcom: ipq9574: Disable eMMC node
>
> .../bindings/spi/qcom,spi-qpic-snand.yaml | 82 ++
> .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 43 +
> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 2 +-
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 27 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/qpic_common.c | 794 +++++++++++
> drivers/mtd/nand/raw/qcom_nandc.c | 1226 +----------------
> drivers/spi/Kconfig | 9 +
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-qpic-snand.c | 1025 ++++++++++++++
> include/linux/mtd/nand-qpic-common.h | 548 ++++++++
> 11 files changed, 2547 insertions(+), 1211 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
> create mode 100644 drivers/mtd/nand/qpic_common.c
> create mode 100644 drivers/spi/spi-qpic-snand.c
> create mode 100644 include/linux/mtd/nand-qpic-common.h
>
> --
> 2.34.1
>

--
மணிவண்ணன் சதாசிவம்