[PATCH 0/3] arm64: dts: add i.MX95 and EVK board

[Peng Fan (OSS)]

Add a minimal i.MX95 dtsi and EVK board dts.
i.MX95 has a M33 running SCMI firmware, but as of now, the scmi pinctrl
driver still not ready for i.MX95, so we count on bootloader to
configure the pinctrl for lpuart and sdhc and it boots well. After pinctrl
driver ready, we could move to use scmi pinctrl.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
Peng Fan (3):
      dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
      arm64: dts: freescale: add i.MX95 basic dtsi
      arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

 Documentation/devicetree/bindings/arm/fsl.yaml    |    6 +
 arch/arm64/boot/dts/freescale/Makefile            |    1 +
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts |   88 ++
 arch/arm64/boot/dts/freescale/imx95-clock.h       |  187 ++++
 arch/arm64/boot/dts/freescale/imx95-power.h       |   55 +
 arch/arm64/boot/dts/freescale/imx95.dtsi          | 1215 +++++++++++++++++++++
 6 files changed, 1552 insertions(+)
---
base-commit: d37e1e4c52bc60578969f391fb81f947c3e83118
change-id: 20240218-imx95-dts-aae4316671a7

Best regards,
-- 
Peng Fan <peng.fan@xxxxxxx>