Re: [PATCH RFC 1/4] dt-binding: phy: hisi-inno-usb2: convert to YAML

[Krzysztof Kozlowski]

On 17/02/2024 11:24, Yang Xiwen wrote:

>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/clock/histb-clock.h>
>>> +
>>> +    peripheral-controller@8a20000 {
>>> +        compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd";
>>> +        reg = <0x8a20000 0x1000>;
>>> +        #address-cells = <1>;
>>> +        #size-cells = <1>;
>>> +        ranges = <0x0 0x8a20000 0x1000>;
>> Drop the node, not related to this binding. If this binding is supposed
>> to be part of other device in case of MFD devices or some tightly
>> coupled ones, then could be included in the example there.
> For CV200, this binding is supposed to be always inside the perictrl 
> device. The PHY address space are accessed from a bus implemented by 
> perictrl.

Every node is supposes to be somewhere in something, so with this logic
you would start from soc@. What's wrong in putting it in parent schema?

Best regards,
Krzysztof