Re: [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding

[Jonathan Cameron]

On Fri, 16 Feb 2024 12:23:48 +0100
Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:

> On 24-02-16, Jonathan Cameron wrote:
> > On Fri, 16 Feb 2024 11:28:19 +0100
> > Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
> >   
> > > From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
> > > 
> > > Add the binding to specify the vcc supply. We can't make it required
> > > since this would break the backward compatibility.  
> > 
> > Given convention for supplies like this is to make them required in
> > the dt-binding to reflect that providing power is not optional (unlikely
> > some other supplies that might not be wired up) and not worry about the
> > fact that we happily provide dummy supplies for them if they aren't in a
> > particular dts, it should be fine to make it required here.  
> 
> Will this fact apply to all dt-bindings? I'm asking because, there are
> many bindings out there without having the -supply in place.

Yes in theory - in practice it's noise to do it unless we have a reason
to be touching the dt-binding anyway.  I don't plan to fix them up on
mass.

Jonathan

> 
> Regards,
>   Marco
> 
> > 
> > Jonathan
> >   
> > > 
> > > Signed-off-by: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
> > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > > ---
> > > Resend since I forgot to add the DT maintainers
> > > 
> > >  .../devicetree/bindings/iio/temperature/ti,tmp117.yaml        | 4 ++++
> > >  1 file changed, 4 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> > > index 8c6d7735e875..cf7799c9734f 100644
> > > --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> > > +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> > > @@ -24,6 +24,9 @@ properties:
> > >    reg:
> > >      maxItems: 1
> > >  
> > > +  vcc-supply:
> > > +    description: provide VCC power to the sensor.
> > > +
> > >  required:
> > >    - compatible
> > >    - reg
> > > @@ -39,5 +42,6 @@ examples:
> > >          tmp117@48 {
> > >               compatible = "ti,tmp117";
> > >               reg = <0x48>;
> > > +             vcc-supply = <&pmic_reg_3v3>;
> > >          };
> > >      };  
> > 
> >