[net-next PATCH] net: phy: aquantia: add AQR813 PHY ID
From: Christian Marangi
Date: Thu Feb 15 2024 - 16:43:57 EST
Aquantia AQR813 is the Octal Port variant of the AQR113. Add PHY ID for
it to provide support for it.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
This is based on the AQR113 patch that has been already reviewed
and accepted (still not in net-next as a rebase was needed)
drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index a6a7980585f5..71bfddb8f453 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -28,6 +28,7 @@
#define PHY_ID_AQR412 0x03a1b712
#define PHY_ID_AQR113 0x31c31c40
#define PHY_ID_AQR113C 0x31c31c12
+#define PHY_ID_AQR813 0x31c31cb2
#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3)
@@ -961,6 +962,25 @@ static struct phy_driver aqr_driver[] = {
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
+ .name = "Aquantia AQR813",
+ .probe = aqr107_probe,
+ .get_rate_matching = aqr107_get_rate_matching,
+ .config_init = aqr107_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
};
module_phy_driver(aqr_driver);
@@ -979,6 +999,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
{ }
};
--
2.43.0